How To Become A Sidemount Technical Scuba Diver Boat

Range

Sidemount cylinder mounting originated for cave diving and have become more popular in all forms of technical diving since. They separate the dual cylinders, with a 1st stage on each cylinder, and mount them on either side of the diver’s body. This doesn’t allow the diver to breathe from either cylinder in the event of a regulator failure, but does give the diver easier access to valves. Sidemount diving gives the diver a larger horizontal profile, but a smaller vertical profile.

International Training, the parent organization for Scuba Diving International (SDI) and Technical Diving International (TDI) offers both SDI and TDI versions of their Sidemount Diver course. Both courses are very similar. Both use the same learning materials (which, by the way, we wrote). So what’s the difference?

Trimix —

Rebreathers allow for greater diving ability by eliminating large cylinders. Instead, they recycle the gas exhaled by divers, scrub the CO2 and inject small amounts of gas. This can greatly increase the time it takes to dive, especially if you are doing deeper dives. Rebreathers can either be sidemounted or back, and their profile is determined by the configuration.

Our SSI technical diving sidemount diver course will allow you to use up to four tanks (cylinders), and make extended dives. The technical sidemount dive course is a great way of getting into technical diving. This will allow you to safely handle multiple cylinders in a single dive. Additionally, you will learn how to configure your sidemount gear as well as how to set up a tec sidemount harness.

Dive Sites

To extend their time at the wrecks and reefs below the ocean floor, decompression divers use oxygen mixtures. Decompression divers can cruise around the ocean floor for as long as 60 minutes, whereas sport divers may only be able to do two bottom dives at 100ft for 15 minutes each.

It is becoming more popular to do technical diving and we were immediately drawn to it at Girls that ScubaHQ! We had many questions and nerves, so we went to Theresia Gollner, who is working at Blue Marlin Gili T in Lombok. We were given an introduction to twin sets by her and then she let us in on the amazing world of technical diving. Here are the lessons she gave us:

Dive Sites
What's at the bottom of the Mariana Trench

What's at the bottom of the Mariana Trench

2 first-stage regulator, 2 2nd-stage regulator, an exposure suit with side pockets and a BCD sidemount. A diving spool, mask and a spare mask. Technical diving equipments. 1 long, 2.10m to 7.10ft hose.

Technical diving is defined by being exposed at the ceiling, which prohibits the diver from reaching the surface at any time during the dive. This can be due either to a literal ceiling (a cave, wreck, or virtual ceiling) or a decompression obligation. In such cases, mandatory decompression stops are required on ascent for anyone who exceeds the NDL. This may require the use of special equipment (e.g. Twinsets, Sidemount, special gas mixtures, and more training are needed to perform those stops as well as other tasks on ascent. This will optimize Nitrogen offgassing.

Are any Titanic survivors still alive

1. Your personal informations (name, email, etc). 2. Pick the preferred date. 3. Click on the Submit button to ask questions or inquire.

It's becoming increasingly popular and Girls that ScubaHQ noticed it quickly! There were lots of questions and nerves. So we went to Theresia Gullner, one of the few female tech instructors in Asia. She works at Blue Marlin Gili T Lombok. We were then introduced to the twin sets and given an introduction to technical diving. Here's what we learned from her:

How To Become A Sidemount Technical Scuba Diver Boat
How To Become A Sidemount Technical Scuba Diver At Night
How To Become A Sidemount Technical Scuba Diver At Night

New gear means new techniques. Scuba diving sidemount is easy if you have the right skills.

Technical divers search for wrecks and reefs in depths below the recreational limit (40 m/130 ft). These divers have the ability to dive into underwater caves and other areas not accessible by regular recreational diving.

How To Become A Sidemount Technical Scuba Diver 200 Feet

Your Sidemount BCD is a harness with a bladder. There are also a number of sliding D-rings, zips, and bungee ropes. It is important that they are in the right place and fit for your tank.

Gear – While the gear is fundamentally identical, divers in their intro tech class (Intro, Tech, Sidemount or the CCR-Air diluent), may notice some fundamental configuration changes. They now have two second stages, each with a separate start stage. Gas planning becomes a detailed, thorough process. The harnesses also have more chrome.

Check our other pages :

Frequently Asked Questions

To begin a technical diving course, you must have completed the following prerequisites: a PADI Advanced Open Water Diver certificate or equivalent, a PADI Enriched Air Diver certificate or equivalent, and a PADI Deep Diver certificate or proof of at least 10 dives to 30 metres/100 feet.
 

The depth range of oxygen rebreathers (simple closed circuit) is limited to approximately 6 m, beyond which the risk of acute oxygen toxicity rises to unacceptable levels very quickly.

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).