Double Acting Hydraulic Punches Bleeding

Masonry

It is fully automatic in terms of punch, return and reset. It features a smooth handle on the top that is comfortable to hold and easy for operators to reach.

Hydraulic bench press will reduce arm fatigue and speed up fabrication. The rugged 3/8-inch plate construction allows for a variety of uses. These dies are compatible with an H-Frame machine, hydraulic punch driver, as well as a 3/4-inch or 7/16 drawbol for dimpling PortaFab machine, which is Scotchman’s entry-level Ironworker. This unit packs 45 tons of hydraulic power and is portable 110 volt. It allows for the alignment of punches to punch thin sheet metal. This punch can also be used to punch spring steel for mounting race in order to punch angle iron. You can punch a hole within 9/16 inches of the web. The rotary-style punch can punch holes within 9/16 inches of the web. It also has enough power to punch hydraulic accessory ports on Edwards ironworkers. The punching time. It has a 4.5 second punching time, a jog down punch to ensure alignment and a power retractable punch. You can choose from 115 volt or a US...

Series —

Simply adjust the mold to process a variety of holes of different shapes and specifications.

The Porta Punch Package includes the 35 Ton C-Frame, Electric/Hydraulic Pum, 10' Hose or 20' Hose, and four sets each of stock Punches and Dies. Select from 1/4", 1/2", 3/8", 7/16", 7/16", 1/2" or 20/32", 9/16", 5/8", 11/2", 3/4", 25/32", and 13/16" sizes for punch sizes.

Double Acting Hydraulic Punches Hammer

This 35-ton portable hydraulic punch press from Cleveland Steel Tool weighs just 31 pounds, is easy to use, and punches in seconds. The dual-action ssures easy linear operation. Unlike other similar tools, these punches will punch and strip inside a 90 degree arc movement of the lever. The upper rotary-style punch generates enough power to punch a 1/2 inch hole through 1/2 inch mild steel plate. The throat of the punch allows for punching…

Gulf States Saw & Machine Co. makes hydraulic punching machines that can punch complex shapes such as squares and rectangulars. Our range includes portable, double-acting hydraulic punches that can be used for multiple purposes in many industries.

Double Acting Hydraulic Punches Hammer
Double Acting Hydraulic Punches Non Differential

Double Acting Hydraulic Punches Non Differential

Hydraulic Benchpresses are a great way to accelerate your fabrication without fatigue. It's made from a robust 3/8" plate construction and is available in various ways. These dies work in an HFrame press and hydraulic punch driver. They can also be used with a 3/4 inch draw bolt or 7/16 drawbol to dimpling PortaFab, Scotchman’s entry-level ironworker. This unit can be carried in a 110 volt portable package and provides 45 tons of hydraulic power. This punch can be used for punching steel spring steel in mounting race. A hole can only be made within 9/16th of an inch of the web. The rotary style punch produces more power than the existing Edwards ironworkers and can also be used to punch additional hydraulic ports. It takes approximately 5 seconds to punch. It has a punching speed of 4.5 seconds and a jog down to align the punch. Choose from 115 or US voltage.

GSS Machinery portable hydraulic punches are perfect for producing holes and slots in beams, angles, channel, plates, and bar stock. This steel hole punch is designed with a Double Action design. The reduced cycle times, combined with the high portability of the machine, allow for faster material handling, resulting in highly efficient hole production.

Valve

It can be used for many tasks thanks to its 10 tonnes of hydraulic pressure. It can take all Mittler Punch & Flare instruments or can be fitted with a hydraulic punch driver. These knock-out punches make it easy to punch holes for the fabricator while remaining cost-effective. Swag Offroad punches can also be used...

Our range of portable, double-acting hydraulic punches has a 27mm diameter, a maximum thickness 13mm in steel and a maximum throat depth of 60mm.

Double Acting Hydraulic Punches Bear
Double Acting Hydraulic Punches Bear

Hydraulic punches are designed to puncture metallic materials with square, round or oblong openings. They are made to be used with mild steel, nonferrous and non-shattering metals.

Some maintenance tips: Always clean the punch and die. Although they do not need lubrication, cleaning can extend their durability. Make use of only Enerpac Oil in both punch and pumps. Match punch and die appropriately at all times. For operations, ensure you set up dies with bigger openings to point downwards. Ensure you change cracked, chipped, or worn-out punches and dies immediately. Always observe the suited lifting force to avoid cracks while processing materials.

Double Acting Hydraulic Punches Used To Actuate

They are powered using hydraulic/air.

The vast majority of industries use hydraulic punches. They save time and offer great cycle times.

Frequently Asked Questions

A knockout punch, also known as a chassis punch, panel punch, Greenlee punch, or Q-max in metalworking, is a hand tool used to punch a hole through sheet metal. It is a simple tool made up of a punch, die, and screw.

A punch is a tool used to make an indent or a hole in a hard surface. They are typically made of a hard metal rod with a narrow tip on one end and a broad flat "butt" on the other.

Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.