Peddinghaus Portable Hydraulic Punches

What's the hardest type of punch

This machine is capable of punching special-shaped holes, such as round holes and oblong ones. The machine also has a backup switch that can stop the punch at any moment. The single-acting hydraulic is compact in design and powered by a hydraulic motor. However, you have manual or electric hydraulic pumps options (depending on your industry requirements).

Here are some maintenance tips: Make sure to clean the punch and die. They don't need lubrication but cleaning can prolong their life expectancy. Use only Enerpac Oil for both the punch and pump. Always match punch and die correctly. You should set up larger openings so that the dies point down for operations. Make sure to immediately replace cracked, chipped or worn-out dies and punches. To avoid cracks in materials processing, always use the appropriate lifting force.

Light Weight —

Capable of continuously processing an indefinite number of holes and these processed holes are safe from burrs, which makes them unique and beautiful.

A few maintenance tips: Clean the punch and die regularly. While they don't require lubrication or cleaning, it can increase their durability. Only use Enerpac Oil in punches and pumps. Match the punch and die according to your needs at all times. Make sure you have larger openings for operations. You should immediately change any dies or punches that are cracked, chipped, worn out, or damaged. When processing materials, ensure you use the correct lifting force.

Enerpac Hydraulic Punches

Hydraulic punches typically can be controlled with hand pumps, hydraulic, gasoline, or electrical control pump. These pumps can be formulated for up to 10,000psi. Hydraulic punches are designed for use with mag drills or twist drills.

This portable hydraulic punch presses from Cleveland Steel Tool, weighing in at just 31 lbs, punches in less than a second and is 35 tons. Easy linear operation is assured by the dual-action. These punches are unlike similar tools. They can punch and strip within a 90-degree arc movement of your lever. The upper, rotary-style punch has enough power to punch 1/2 inches through 1/2 inch plate of mild steel. The throat of this punch permits punching...

Enerpac Hydraulic Punches
Aerial Work Platforms

Aerial Work Platforms

The hydraulic pressure of 10 tons allows it to perform a wide range of tasks. This press can accept any Mittler Punch & Flare tool or can be used in a hydraulic punch drive. These knockout punches are a cost-effective way to punch holes to make it easier for fabricators to do their jobs. Swag Offroad punches are also available...

Double-acting hydraulic punches with portable portability can process a wide variety of shapes, regular and oblong punches, as well as dies.

Mx 700

GSS Machinery can custom-make your punching machine for your particular applications. Also, our accessories allow us to extend your capabilities such as punching in horizontal or vertical positions and punching with no hands. This enhances your punching quality.

The mold can be adjusted to accommodate a wide range of holes and different shapes.

D Cut Punching Machine Price
D Cut Punching Machine Price

Hydraulic punches can typically be controlled using hand pumps, hydraulic or gas control pumps, which can be formulated up 10,000 psi. Hydraulic punches may be used to perform operations that require mag drills or handheld twist drills.

Capable of drilling smooth and top-level precise holes in 16.5 seconds. It comes with complete accessories to meet distinct requirements.

Hydraulic Punch Parts

They can process an infinite number of holes at a time. These processed holes are free from burrs and make them beautiful and unique.

A great steel welded machine construction provides excellent temperature relief, rigidity, precision, durability, and strength. Both manual and electrical hydraulic pumps are available.

Frequently Asked Questions

A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.

The combination of ease of hydraulic operation and precision-ground knockouts results in clean, quick holes. Pumps are available with either foot or hand pumps. 3-point punch/die sets that are precision-ground.

Hydraulic punches are used to create round, square, or oblong holes in metal. They are intended for use with mild steel, nonferrous metals, and some plastics (non-shattering). Hydraulic punches can be powered by hand pumps, air/hydraulic, gas, or electric pumps capable of producing up to 10,000 psi (700 bar).