Technical Sidemount Scuba Dive Training How

Dive Technician Course Panama City

Sidemounting is something I haven't tried before. However, from watching his video training online, I knew Steve was the best man to teach me this skill and give me confidence about it. I was not wrong! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is a great teacher. He is patient and gives a lot of his time. I was absolutely right! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is an excellent teacher. He's patient, hardworking and puts in a lot to every lesson he gives. Everything is planned and done with great attention to detail. It was an unforgettable and enjoyable experience. Sidemount PCB Essentials Course completely transformed my diving. In a matter of a few weeks, my awareness level and skills were higher than I could have ever imagined. Everything is in place: your harness set-up, your weight and position, the trim of the cylinder, and your overall balance in the water. This gives you the feeling of true sidemount setup, with no back pain and makes you feel more confident and relaxed. This course was difficult but enjoyable. Every day started with a planning and theoretical session. Each day ends with a video review and discussion about the drills we performed in the water. The learning curve was steepened because we had a tendency to drain our cylinders whenever we were in the water. All was handled with professionalism and in a comfortable, safe environment. Steve will make this course easy for you. Steve will help to make you a better diver! read less

Here’s YOUR chance to help us CLEAN up the oceans, GIVE BACK to your community, VOLUNTEER for a greater purpose to give South Florida a healthy eco-system so it may THRIVE for years to come.

Sidemount S Drill —

Sidemount PCB Diving Courses are a useful stand-alone course for the technical diver who wants to become more skilled and proficient with different gear configurations regardless of if he intends to use sidemount all the time. The course may also be taught in conjunction with any of TDI’s other open-circuit specialty courses, on the condition that all prerequisites and standards applicable to both courses are fully met.

Sidemount is something I've never attempted before, but after watching his online training videos I was confident that Steve would be able to help me. It was a great experience! It was truly an unforgettable week! Sidemountpcb Essentials has exceeded all my expectations. Steve is a wonderful teacher and has a lot... read moreI've never attempted sidemount, but after watching his online training I knew that Steve was the right man to help me. I was right! It was truly an unforgettable week! Sidemount PCB Essentials has exceeded all my expectations. Steve is a wonderful teacher. He has patience and takes time to help his students. Every detail is meticulously planned. It was a memorable experience that I enjoyed. Sidemount PCB Essentials Course changed my diving. In a very short time, my awareness and skills under water rose to levels I had never imagined. Everything is in order: the harness setup, weight, position, cylinder trim, and your balance in water. You will feel relaxed and confident, and you'll experience true sidemount setup... with no back pain! It was challenging but very enjoyable. Each day begins with a planning and theoretical session. Then, we have a video review of our drills in water. Everything is explained in great detail. Our learning curve is steep because we had to drain our cylinders each time we entered the water. The entire process was performed in a relaxed, secure environment and yet showed extraordinary professionalism. You should not hesitate to take this course with Steve. Steve will show you how to become a great diver if you're passionate about Sidemount PCB. read less

Scuba Tank

They are not issued unless earned. Not just taking part in the course does NOT guarantee certification. For cave courses certification cards may be available from multiple training agencies. C-cards can be purchased for around $30 depending on the agency. An instructor will be able to tell you more.

We do not issue certification cards unless they are earned. The mere fact that you have taken part in a training course does not make you certified. There may be multiple certification agencies that offer certification cards for cave courses. C-cards typically cost around $30 per card depending on their agency. You can ask your instructor more.

Scuba Tank
Can Civilians Buy rebreathers

Can Civilians Buy rebreathers

Steve and I first met 10 years back when he traveled to Portugal to train our staff in Sidemount PCB. (At the time, it was still the beginning of Sidemount PCB). I could instantly see his passion, technical ability, professionalism. The website and online learning have made this possible. These contents can be used by anyone, starting from someone... continue reading. Steve first came to Portugal 10 years ago to train our staff in Sidemount PCB (at that time it wasn't the beginning of Sidemount PCB). I immediately noticed his passion, technical proficiency, and professionalism. The website and online courses have made this a new experience. You can find everything you need, whether you're a beginner, an instructor or an expert. Sidemount is now an easy way to learn how to dive. read less

International Training is the parent organization of Technical Diving International and Scuba Diving International. They offer both TDI and SDI versions of their Sidemount PCB Diver courses. Both courses are similar. Both courses use the same learning materials (which we also wrote). What's the difference between them?

Scuba Set

Steve, thank you so much for the online courses. I learned more online than what I expected. I find that your videos are much more helpful than books and other materials. I plan to learn the most important lessons again before taking the water course. Regards Rafal

Sidemount PCB gear configuration offers an alternative to the traditional back mounted scuba cylinder(s) configuration. The NAUI Sidemount PCB Diver course provides you with the skills and knowledge needed to conduct open water dives utilizing this particular gear configuration. Upon successful completion divers will be competent to use sidemount gear configuration in additional training and diving opportunities.

Tec Diving Equipment
Tec Diving Equipment

TDI Trimix DiverThe TDI Trimix course provides the training required to competently and safely utilize breathing gases containing helium for dives that require staged decompression, utilizing nitrox and / or oxygen mixtures during decompression to a maximum depth 200’.

This course will teach you how to set up and operate the equipment that you will use in your training as a cave diver or tech diver. This includes:

What does no deco mean

Hi Steve, I wanted to thank you for all the sections of the online courses, it was really worth going through all these lessons, I learned more online than I thought. Your well-made videos, actually help me understand a lot of things much faster than from book and other materials. I am planning to repeat the most important lessons before the water course. Regards Rafal

Stage-only diving is the use of standard deco/stage cylinder configuration, without back-mounted cylinders, on an otherwise standard, or partly modified tec/rec BCD. The lower cylinder is attached to waist D-Rings and the upper cylinder to shoulder D-Rings, both via direct bolt-snap. Some divers (untrained in specific sidemount diving techniques) often incorrectly assume this approach to be sidemount diving. No bungee cord is utilised in the upper attachment, causing the cylinders to hang low beneath the diver and not in line (parallel) with their torso beneath their armpits. Without change of the BCD design, the lack of back-mounted cylinders also causes taco’ing of wing designs and much instability.

Technical Sidemount Scuba Dive Training How
Check our other pages :

Frequently Asked Questions

from 130 to 148 feet
Those who are already decompression certified can immediately qualify for rebreather decompression dives. Individual training agencies set depth limits ranging from 130 to 148 feet (40 to 45 meters).

The PADI Rebreather/Advanced Rebreather Diver courses take four days to complete. The course fee is $1250, which includes books and rental.