How To Become A Sidemount Technical Scuba Diver Board

Mentality – Technical diving is still fun. It’s all about seeing cool things, just like sport diving, but technical divers see sights longer, deeper, and hidden to the sport diver. While technical divers are still fun-focused they also regular focused. Jokes can still be made, laughs can still be had, but a certain sense of serious must come about when it comes to dive planning and execution. All diving has risks, and those risks are increased if proper planning, skill practice, and execution are not done.

Next, it was time to do technical sidemount. This involves adding our deco 50-percent and 100-percent oxygen tanks on each side. You will have a higher profile underwater, so it is important to keep the tanks as close to your body as possible. There are two clips at each side of the waist. You adjust the tank position by inhaling down your tanks. This is where simplicity is key. You also need to switch between tanks every few minutes. This ensures that the pressure in each tank is at the same level, so even if one tank or regulator fails, there will still be gas for you to breathe. Building up experience is the key to comfort, enjoyment and success with new technologies. The next few days were spent doing sidemount dives, budding up with Evolution coowner David Joyce, a highly experienced Tec diver and Trimix instructor. One dive took us to the Japanese Mogami Wreck at 164 feet. I was captivated by the old gas masks, uniforms, and bones that we found.

However it is important at greater depths to decrease effort and achieve maximum performance to avoid overexertion and CO2 buildup. CO2 is the trigger for our breathing reflex, so the more CO2 we build up the more we will feel the urge to breathe. This means in the same amount of time we will pump more gas through our lungs and we take in more gas in the same amount of time.

Interested in becoming a Sidemount diver? You have come to the right place as this post is all about the nitty-gritty of what is involved!

The SSI technical-sidemount diver course allows you to take extended dives with four+ tanks (cylinders). Technical diving is easy with the technical sidemount course. You can learn to operate multiple cylinders at once. Config your sidemount gear. Learn how to make a tec sidemount harness. Also learn how adjust the sling tanks on your body.

Due to the issues with single-orifice doubles or backmounted independents (which are not as common in modern diving), backmounted doubles were invented. Independents are two independent cylinders attached to one's back, with independent regulators for each. One cylinder was sufficient to take care of a failed 1st Stage. Single orifice duplicates were two cylinders linked with a valve and one regulator. A single orifice doubles set would cause all gas to be lost if a first stage fails. These problems can be eliminated with the modern isolated manifolds. Each cylinder can work independently but divers can also inhale gas from both of them through one regulator. These doubles are typically held together with metal bands. The valves can also be linked with an isolation device, which allows them to be seperated if required. Backmounted doubles diving offers a profile that's vertically identical to regular single-cylinder backmount.