Specific Skills - These are the skills required to perform specific types of diving. Navigation and line skills are developed until they are effortless for overhead diving. Decompression divers have the ability to execute stops and gas management plans without a blink of an eye. Rebreather divers test, build and then disassemble their equipment meticulously to ensure it works properly. Each course requires skills that are established at the initial level. Then, it is possible to move on to higher levels. Each step further or hones these skills, and adds more challenges to make a diver well-rounded and knowledgeable.
Sidemount PCB is available to help you and your physician with questions about medical fitness for diving.
The Sidemount Diver Specialty course dive may count toward your Advanced Open Water Diver certification – ask your instructor about earning credit.
I arrived just two months ago on Malapascua Island in Philippines. There, I will learn how to become a Tec diver instructor. Since 2012, I've been a Bali recreational instructor. I am eager to improve my diving skills and expand my knowledge. Sidemount PCB was the place where my first experience of technical diving was. Tom West, PADI course director and instructor-trainer for Tec, made me a Certified Tec-50 Diver.
Rentals are available for items such as primary lights and cylinders that can be hard to transport. If you require any of these items, please let us know.
New gear means new techniques. If you are able to dive sidemount, it is easy to acquire new skills.
So if you want to dive sidemount, especially if you are already a tec diver, you need to learn your new rig, how to adjust it, how to enter into the water with it (yes it is very different, more relax too, though), and so much more.
Tec 40 is the first step to start the TecRec program with Padi. The prerequisites are Advanced Open Water and Deep Diver certifications as well as Nitrox. In addition to that, before starting the course a minimum of 10 Nitrox dives have to be proved. The certification allows divers to dive to 40m doing limited decompression using gas mixes up to 50% of oxygen. The Tec 40 is also the prerequisite to continue with Padi Tec 45 which allows to do unlimited decompression time as long as it is carefully planned. The next step will be Tec 50 that enhances the allowable depth to 50m.
Most agencies allow you to choose between technical Sidemount or recreational Sidemount. While the prerequisites for SDI and TDI are identical, the tec Sidemount course will require more skills. You will need to master them more - perfect trimming and maintaining a level of skill is essential!
An Open Water Diver is all you need to get started in Sidemount diving. It is important to have good buoyancy, trim, and be able set up your equipment and manage it yourself. Sidemount diving can bring a new dimension to your equipment setup and skills.
As your goal in taking this course is to learn the basic set up and operation of the equipment you will use as part of your cave and/or tech diver training, you will need that same equipment for this course. This includes:
One of the big risks for a technical diver is decompression sickness. It occurs when nitrogen gas cannot exit the body thru respiration on ascent as the ambient pressure decreases. Therefore stops have to be executed on ascent in order to avoid a pressure difference too big so nitrogen bubbles can be formed. Buoyancy control is very important to control the stops on ascent and increase efficiency for off-gassing of nitrogen. Another important skill is proper breathing which makes metabolism efficient. Trim, which we call a proper tech diving position such as horizontal with a slight arch in the back, looking forward and knees at a 90 degree angle with fins pointing back. Trim prevents stirring up sediments on the bottom as well as most efficient movement in the water. And of course proper finning techniques to avoid overexertion are mandatory to make a diver achieve maximum performance. Now you might say, we want to have fun when we go diving and not be a machine.
Sidemount cylinder mounting originated for cave diving and have become more popular in all forms of technical diving since. They separate the dual cylinders, with a 1st stage on each cylinder, and mount them on either side of the diver’s body. This doesn’t allow the diver to breathe from either cylinder in the event of a regulator failure, but does give the diver easier access to valves. Sidemount diving gives the diver a larger horizontal profile, but a smaller vertical profile.
Sidemount diving requires only an Open Water Diver to begin. Although it's important to have excellent buoyancy and trim, you should also be able handle your equipment independently. Sidemount diving offers a whole new level of skill and equipment setup.
Technical diving (also known as tec diving or tech diving) is non-professional scuba diving that exceeds the agency-specified limits of recreational diving.
2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.