If you're not yet ready to try local diving but would like to support your local dive store, you can do your eLearning at home and then go on to your training dives abroad. Request a referral from your local PADI Dive Center.
Sidemount and technical were my first courses. Sidemount diving involves placing your tanks in your hands. I was so numb that my fingers and knuckles had been cut by the end. The idea is to take the tanks off of your hands and let them flow out in front. After making adjustments to the harness's size, the afternoon dive went much easier. I was now able to unclip the harness and 'Superman' with the tanks. Sidemount provides an amazing degree of freedom. Matt installed obstacle courses, and we soon found ourselves flying around them while holding tanks at our feet. We also tried barrel-rolling and swimming upside down.
Your Sidemount rig also includes clips and tank bands. These clips will attach to your harness. Again, their location is crucial for the positioning of your tanks.
All Tec diving (open circuit and closed circuit rebreather), as well technical scuba diving courses, are taught at Scotty’s dive centre headquarters facility. It is located in Mactan in Cebu province. You are welcome to walk in or have us pick you up from your hotel if you are not a Shangrila guest.
Sidemount diving stems from the cave diving world but has also found its way into the recreational, non-overhead diving world in recent years.Simply put: instead of wearing one or two tanks mounted on your back, you will wear your tanks on your side. The tanks are attached to a Sidemount BCD with clips and/or bungee cords allowing for great flexibility. Initially, it was this flexibility that allowed cave divers to take their tanks off underwater to fit through narrow spaces as well as making their overall profile smaller.
The initial pool sessions were tough; I felt like an open-water diver again, strapped into the twin tanks and trying to conduct valve drills. But as we progressed through the Tec 40, 45 and 50 courses, new skills started to come naturally, and by the end of the course I was enjoying myself. The satisfaction in Tec diving comes from taking your dive skills, buoyancy and awareness to the next level. Knowing that you’re capable of managing life-threatening emergencies at depth, and without the option to ascend straight to the surface (due to decompression requirements) is quite a buzz. And it’s satisfying to execute your dive plan with military precision.
Sidemount diving provides an independent air source. Two tanks are used, each with their own regulators and first stage, SPG. This makes it much safer and gives little air-hogs (like me) a lot more oxygen. Sidemount's tanks can be easily accessed from the surface. There is no pressure on the back.
You can rent items like primary lights and cylinders, which may be difficult to carry. Please let us know if you need these.
Technical divers search for wrecks and reefs in depths below the recreational limit (40 m/130 ft). These divers have the ability to dive into underwater caves and other areas not accessible by regular recreational diving.
Sidemount diving has become very popular in open water. It is more comfortable than having a tank on the back and allows you to have more fun.
I will admit my Sidemount Diver course was probably one of the most challenging courses I have ever done. Mind you, this was mainly because my trusted dive center in Koh Tao, Big Blue Tech, and my instructor Fiona included a lot more skills and dives as part of my course than required. While always making sure that my task load was manageable we practiced skills over and over again and included things like mask removable, tank removable underwater, SMB deployment, out of air drills, and many more all while staying (or at least trying to) in perfect trim.
Technical diving is great fun, but it isn't recommended for anyone looking to dive deeper. Cave and deep diving pose a higher risk. It is possible to mitigate this risk through careful dive planning and training. Divemasters performing these dives will be held to a high standard. It will take practice and hard work to become a technical diver. The only way to improve your water time is through research and reading. Divers will often notice that the minimum standards of diving are often exceeded in training courses. Technical instructors can often exceed these minimum standards. Technical training helps to teach diver redundancy. While it may sound scary and difficult, it is necessary to dive in such an environment. Technical training is fun, challenging and gives you the chance to see places in the world that are closed to others.
Mentality - Technical diving still has its fun side. It's about seeing cool stuff, just as sport diving. But technical divers see things longer, deeper and more hidden than the sport diver. Although technical divers are still fun-focused, they are also regularly focused. There are still jokes to be made and laughs can be had. But, diving planning and execution must be done with a sense of seriousness. Divers are exposed to risks.
Decompression divers can use all sorts of oxygen mixtures to extend their time looking at reefs and wrecks on the sea floor. While the sport diver may only have two 15-minute bottom time dives at 100ft, the decompression diver is able to cruise for up 60 minutes. This allows them to get the most bang possible.
from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.