Technical Sidemount Scuba Dive Training Facility

Technical Sidemount Scuba Dive Training University

Please send me a renewal code to the Package 1 Instructor Course. I look forward to my fifth year with sidemountpcb.com. Your team and you continue to be an inspiration and guidance source. All the best! Scott

Sidemount PCB dives are becoming more popular in technical diving for general decompression. There are many certification agencies that offer recreational and technical sidemount training programs.

Twinset —

I've never tried sidemounting before but I learned a lot from his online training and I was confident in my abilities. I was correct! It was truly a life changing week! The sidemountpcb essentials course far exceeded my expectations. Steve is a great teacher with a lot of patience. I was not wrong! It was truly a life changing week! Sidemount PCB Essentials far exceeded my expectations. Steve is a great teacher. His patience is amazing and he puts in a lot time and effort with his students. Every aspect of the lesson is well planned and executed with great care. It was both memorable and rewarding. Sidemount PCB Essentials Course was a transformative experience for me. In such a short time, I was able to increase my awareness and improve my skills below water. Everything is in its right place, from the harness set-up, to the weight and position of the swimmers, to the cylinder trim and to your balance in the water. You feel more confident, relaxed, and have a true sidemount setup. This course was both challenging and very enjoyable. Each day starts with a planning and theoretical session. We end with a video review about what we did in the water. This is where all details are discussed. It was a tedious process to drain the cylinders before we could go into the water. This is why our learning curve has been so steep. Everything was handled in a calm and secure environment, yet with remarkable professionalism. Steve's course is worth it. Steve will assist you in achieving more than you could ever imagine if Sidemount PCB is your passion. read less

We provide courses for Recreational, Technical, Sidemount PCB, Overhead / Cave, Advanced Wreck, and Professional Development through the following agencies: SSI, SDI, TDI, ERDI, PFI, RAID.

How long is rebreather training

Your online course was a great learning experience. Although I have had a few lessons with instructors during my scuba career, I can say that I have never seen such detailed, practical and useful explanations on how to be a better diver. My PADI AOW training was difficult because I struggled with buoyancy control when I attempted to shoot my SMB ..... I just had this amazing experience with your online course. Although I have had a few lessons with other instructors during my scuba career, I can say that I've never seen such detailed, practical, and useful explanations on how to be a better diver. As I attempted to shoot my SMB, my buoyancy control was a problem when I completed my PADI AOW training. My instructor suggested ways to increase my buoyancy. He advised me to practice. He was sure he had good buoyancy control but didn't tell me the importance of weighting properly, breathing control, and so on. Your videos were eye-opening. My dive buddies didn't get it. Even my highly-recommended instructors still ask me why I do sm. Is it useful? It is mostly done by cave divers. It was a great decision. It's a whole new world. Although nobody taught me or checked my SM skills, many times when I dive with other divers, they comment on how great my trim is. Your videos taught me everything, including how to set up my equipment, exit the water, and solve problems. We should meet up and have training together. I want to help other divers become better and more qualified. While I know there are many great instructors and divers out there, I believe your contribution to the scuba diving community is significant and vital. We are grateful for your efforts. Regards, Csaba read less

Steve/Vas, Your instructor series has been amazing. Please allow me to be the first person to state that I agree with everything you said. One can learn SM simply by watching the videos. I was able to sacrifice my learning without the help of SM Essentials Instructor. It took me nearly one year to get good at AL80s. I then read moreSteve/Vas. The instructor series you have created is truly amazing. Let me just say that I agree with everything you have to say. As I have shown, anyone can learn SM from watching videos. I was able to sacrifice my learning curve, but not without the help of SM essentials instructor. It took me almost one full year to get used to AL80s. I completed the tech dive level one year later and informed my tech instructor that I was diving in SM configuration. I had to explain to him that I taught it myself. His response was "you most likely need to take a SM class with me depending upon how I do on dive 1". After my first dive he said, "There is no reason why you should take a class alongside me." Your online training is perfect, but I would go back to Joe Seda if I had to. I plan to continue the course with him in the future. Regards Tony read less

Technical Sidemount Scuba Dive Training Facility
How long is rebreather training
Course

Course

International Training, the parent organisation for Technical Diving International / Scuba Diving International (TDI), offers both the SDI and TDI versions their Sidemount PCB Diver course. Both courses are very similar. Both courses share the same learning materials (which were written by us). What is the difference?

Please send me the renewal code for Package 1 - Instructor Course. I look forward for my 5th year at sidemountpcb.com. Your team continues to be an amazing source of inspiration, guidance, and support. All the best! Scott

Divers

Steve met me a little more than 10 years ago, when he visited Portugal to teach Sidemount PCB to our staff (at that time it was very early days of Sidemount PCB). I immediately noticed his passion, technical skill, and professionalism. This was made possible by his website and online training. These contents are great for anyone who is just starting. His passion, technical skill, and professionalism was evident immediately. This was made possible by his website and online training. It is easy to use the contents, whether you are a beginner or an experienced diver. We appreciate your efforts to make sidemount diving a simple and accessible option. read less

Sidemount PCB Diving Classes are an essential course for technical divers who want to be more proficient in different gear configurations, regardless of whether they intend to use sidemount every day. You can take the course in conjunction with any of TDI’s open-circuit specialty courses provided you meet all prerequisites.

Technical Sidemount Scuba Dive Training Zip
Technical Sidemount Scuba Dive Training Zip

Sidemount PCB Diving Courses are a useful stand-alone course for the technical diver who wants to become more skilled and proficient with different gear configurations regardless of if he intends to use sidemount all the time. The course may also be taught in conjunction with any of TDI’s other open-circuit specialty courses, on the condition that all prerequisites and standards applicable to both courses are fully met.

Sidemount PCB Stage: This is the place where the diver sets up cylinders by attaching tank straps or bungee to clips and using special valves (left- and/or right-handed). Sidemount configuration: This is the practice of using bungee loops/or buttplate rails as a way to store stage/decocylinders in an organized manner against your sides, while diving in back-mounted doubles/CCR.

How long do Saturation divers live

After completing the course successfully, graduates are allowed to engage in sidemount diving activities with no supervision provided that they adhere to these guidelines:

Sidemount PCB Diving was developed in the early days of cave diving. It was pioneered in this way by Lamar Hires, who used multiple tanks in a compact and streamlined manner to reach places back mounted divers couldn't. The technique has grown to be one of the most popular in our sport.

Check our other pages :

Frequently Asked Questions

A typical diver, at a typical depth, with a typical tank

Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.

332.35 m
Hello and welcome to the Officially Amazing universe. Ahmed Gabr. Ahmed, 41, of Egypt, has broken the record for the deepest SCUBA dive, diving 332.35 m (1,090 ft 4.5 in) in the Red Sea off the coast of Dahab.

from 130 to 148 feet
Those who are already decompression certified can immediately qualify for rebreather decompression dives. Individual training agencies set depth limits ranging from 130 to 148 feet (40 to 45 meters).