Technical Sidemount Scuba Dive Training Jet

Technical Sidemount Scuba Dive Training Key West

Stage-only diving is the use of standard deco/stage cylinder configuration, without back-mounted cylinders, on an otherwise standard, or partly modified tec/rec BCD. The lower cylinder is attached to waist D-Rings and the upper cylinder to shoulder D-Rings, both via direct bolt-snap. Some divers (untrained in specific sidemount diving techniques) often incorrectly assume this approach to be sidemount diving. No bungee cord is utilised in the upper attachment, causing the cylinders to hang low beneath the diver and not in line (parallel) with their torso beneath their armpits. Without change of the BCD design, the lack of back-mounted cylinders also causes taco’ing of wing designs and much instability.

Sidemount PCB Harness (or Sidemount Harness): This special Harness is similar to a BCD and is extremely light-weight. This harness includes several D-rings on the shoulder straps as well as a Buttplate with rings or sliders.

Steve, just wanted you to know how much we appreciate your online Sidemount PCB course. I was unable to complete my PADI sidemount PCB training because my XDeep harness system wasn't working the way I wanted. Although the instructor was very knowledgeable, I could tell that he wasn't a true sidemounter. I had signed up for your free online course which was great, but... read onSteve, I wanted to thank your amazing online Sidemount PCB class. I was unable to get my PADI sidemount PCB training done last year because my XDeep harness system wasn't as streamlined as I needed it to be. Although the instructor was very knowledgeable, it was clear that he didn’t live and breathe sidemount. I had signed up for your course, which was great but didn't give me enough. I am going to Florida to complete my Overhead Environment training. I wanted to make sure my skills were up to date. After viewing your entire online course, WOW! Your suggestions were invaluable in helping me rebuild my XDeep bungee harness. Your instructions helped me rebuild my entire bungee system. I also redid my attachment points and wing. I now feel like my setup is right and I'm very comfortable in the water. I want to thank you once again. Next, I want to master all my skills. This is easier because my harness is correctly set up. Wish I had spent the money to get your training a full year ago. Take care and keep the updates coming. Thanks, Jason read less

Sidemount PCB harness: This is a specialized Harness, similar to a BCD. It's very light and low in weight. This harness has several D rings on the shoulder straps. It also features a Buttplate that can be fitted with rings or sliders.

Sidemount Scuba Setup

The course will require the same equipment, as you will need it for your technical diving and cave training. This includes:

Also, the SDI Sidemount PCB Diver certification counts towards a single specialty rating to achieve the SDI Advanced Diver Development program.

Sidemount Scuba Setup
Technical Sidemount Scuba Dive Training Workouts

Technical Sidemount Scuba Dive Training Workouts

Technical diving requires divers to have at least one tank. Sidemount PCB, which allows you to create multiple cylinders and use them for technical diving, is becoming more popular. You can dive into the world of Tec diving by taking the Tec Sidemount PCB Diver class. Then, you can apply what your learned to other TecRec courses. Your instructor might suggest that you integrate this course with Tec 40/Tec 45/Tec 50 courses.

SidemountPCB is a type of scuba equipment that has diving tubes mounted on the sides of the diver. They are located below the shoulders and along their hips. It was first popularized by cave divers who can penetrate smaller sections of cave and can change tanks with greater ease. Divers who do technical wreck diving penetrations have also discovered the same benefits when operating in restricted spaces. We have qualified instructors who can teach scuba diver training in Thailand.

How deep can you dive before bends

TDI Intro to Technical DivingThe TDI Intro to Tech Course is an introductory course that expands on recreational training by improving dive planning methods, in-water skills, and streamlining existing gear configurations in a controlled and fun learning environment. This course is excellent for those beggining their journey into the exacting world...

It is possible to obtain qualifying certifications through other diving training organizations. Please ask your Tec Sidemount PCB Instructor.

8 Diving
8 Diving

If you're at the age of 18 and have logged at minimum 30 dives, you can apply for a Tec SIDEMOUNT PCB Diver course. It is highly recommended to also have a PADI Enriched A Diver certification.

If you're a PADI Advanced Open Water Diver, at least 18 years old and have a minimum of 30 logged dives, you qualify to enroll in a Tec Sidemount PCB Diver course. It's recommended that you also have a PADI Enriched Air Diver certification.

Side-mount

Although we can teach the SDI course if specifically requested, by default we offer the TDI one. It is possible to take this as a standalone program; however, our students generally combine this with our Apprentice Cave Diver course.

Sidemount PCB is a configuration that allows you to scuba dive with cylinders attached along the side of the diver. Instead of being on the back, the cylinders are placed below the shoulders and along your hips. Because smaller sections of cave are possible to penetrate, and tanks can be easily changed, it was initially popular with cave divers. Technical wreck diving divers also saw the benefits of operating in small spaces. Thai instructors are highly qualified to instruct scuba diving classes and scuba dive training.

Technical Sidemount Scuba Dive Training Jet
Check our other pages :

Frequently Asked Questions

A typical diver, at a typical depth, with a typical tank

Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.

332.35 m
Hello and welcome to the Officially Amazing universe. Ahmed Gabr. Ahmed, 41, of Egypt, has broken the record for the deepest SCUBA dive, diving 332.35 m (1,090 ft 4.5 in) in the Red Sea off the coast of Dahab.

from 130 to 148 feet
Those who are already decompression certified can immediately qualify for rebreather decompression dives. Individual training agencies set depth limits ranging from 130 to 148 feet (40 to 45 meters).