Side Mount Certification

What is PADI adventure diver

You will need the same equipment as the course to learn how to operate and set up the equipment you'll use for your tech diving training. This includes:

The NAUI Helitrox Diver course provides the training and experience necessary to understand the hazards of utilizing helium-enriched EANx for dives to depths not exceeding 150 fsw (46 msw) that may require staged-decompression, utilizing EANx mixtures and/or oxygen during decompression. Graduates will be competent plan and execute extended range dives requiring staged-decompression utilizing Helitrox and oxygen.

Technical Sidemount Scuba Dive Training X-ray —

We can offer the SDI course if requested. However, we only offer the TDI course by default. This can be taken as a stand-alone program, but our students usually combine it with the Apprentice Cave Diver course.

This course provides you with the theory, methods, and procedures of planned staged decompression diving while using optimal breathing gas mixtures. Participants will learn how to plan and conduct a standard staged decompression dive to depths not exceeding 130 fsw (40 msw).

How long can you dive on rebreather

Stage-only diving is the use of standard deco/stage cylinder configuration, without back-mounted cylinders, on an otherwise standard, or partly modified tec/rec BCD. The lower cylinder is attached to waist D-Rings and the upper cylinder to shoulder D-Rings, both via direct bolt-snap. Some divers (untrained in specific sidemount diving techniques) often incorrectly assume this approach to be sidemount diving. No bungee cord is utilised in the upper attachment, causing the cylinders to hang low beneath the diver and not in line (parallel) with their torso beneath their armpits. Without change of the BCD design, the lack of back-mounted cylinders also causes taco’ing of wing designs and much instability.

Sidemount PCB Harness (or Sidemount Harness): This special Harness is similar to a BCD and is extremely light-weight. This harness includes several D-rings on the shoulder straps as well as a Buttplate with rings or sliders.

How long can you dive on rebreather
Steve

Steve

Blue Label Diving offers all levels of Sidemount PCB Diving courses from SSI, TDI, and PADI in Thailand. From recreational side mount diving in two tanks to advanced sidemounting in overhead environments, and even instructor level. Only problem is that you might never want to go back to backmount diving after you have mastered sidemount diving.

I just wanted to tell you that your online training has been outstanding. Every time I log on, I learn something. Your website is amazing in terms of the value it provides. We are grateful for your time.

Technical Sidemount Scuba Dive Training Online

Technical diving requires divers to have at least one tank. Sidemount PCB, which allows you to create multiple cylinders and use them for technical diving, is becoming more popular. You can dive into the world of Tec diving by taking the Tec Sidemount PCB Diver class. Then, you can apply what your learned to other TecRec courses. Your instructor might suggest that you integrate this course with Tec 40/Tec 45/Tec 50 courses.

SidemountPCB is a type of scuba equipment that has diving tubes mounted on the sides of the diver. They are located below the shoulders and along their hips. It was first popularized by cave divers who can penetrate smaller sections of cave and can change tanks with greater ease. Divers who do technical wreck diving penetrations have also discovered the same benefits when operating in restricted spaces. We have qualified instructors who can teach scuba diver training in Thailand.

Technical Sidemount Scuba Dive Training Unit
Technical Sidemount Scuba Dive Training Unit

Steve, just wanted you to know how much we appreciate your online Sidemount PCB course. I was unable to complete my PADI sidemount PCB training because my XDeep harness system wasn't working the way I wanted. Although the instructor was very knowledgeable, I could tell that he wasn't a true sidemounter. I had signed up for your free online course which was great, but... read onSteve, I wanted to thank your amazing online Sidemount PCB class. I was unable to get my PADI sidemount PCB training done last year because my XDeep harness system wasn't as streamlined as I needed it to be. Although the instructor was very knowledgeable, it was clear that he didn’t live and breathe sidemount. I had signed up for your course, which was great but didn't give me enough. I am going to Florida to complete my Overhead Environment training. I wanted to make sure my skills were up to date. After viewing your entire online course, WOW! Your suggestions were invaluable in helping me rebuild my XDeep bungee harness. Your instructions helped me rebuild my entire bungee system. I also redid my attachment points and wing. I now feel like my setup is right and I'm very comfortable in the water. I want to thank you once again. Next, I want to master all my skills. This is easier because my harness is correctly set up. Wish I had spent the money to get your training a full year ago. Take care and keep the updates coming. Thanks, Jason read less

Sidemount PCB harness: This is a specialized Harness, similar to a BCD. It's very light and low in weight. This harness has several D rings on the shoulder straps. It also features a Buttplate that can be fitted with rings or sliders.

Side Mount Certification
Sport Diving

Although we can teach the SDI course if specifically requested, by default we offer the TDI one. It is possible to take this as a standalone program; however, our students generally combine this with our Apprentice Cave Diver course.

Sidemount PCB is a configuration that allows you to scuba dive with cylinders attached along the side of the diver. Instead of being on the back, the cylinders are placed below the shoulders and along your hips. Because smaller sections of cave are possible to penetrate, and tanks can be easily changed, it was initially popular with cave divers. Technical wreck diving divers also saw the benefits of operating in small spaces. Thai instructors are highly qualified to instruct scuba diving classes and scuba dive training.

Check our other pages :

Frequently Asked Questions

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.