Technical Sidemount Scuba Dive Training Magazine

Technical Diving Rig

Items such as cylinders and primary lights, which my be difficult to travel with, are available for rental. Be sure to alert us if you will need any of these.

Sidemounting is something I haven't tried before. However, from watching his video training online, I knew Steve was the best man to teach me this skill and give me confidence about it. I was not wrong! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is a great teacher. He is patient and gives a lot of his time. I was absolutely right! It was truly life-changing! Sidemount PCB Essentials was beyond my expectations. Steve is an excellent teacher. He's patient, hardworking and puts in a lot to every lesson he gives. Everything is planned and done with great attention to detail. It was an unforgettable and enjoyable experience. Sidemount PCB Essentials Course completely transformed my diving. In a matter of a few weeks, my awareness level and skills were higher than I could have ever imagined. Everything is in place: your harness set-up, your weight and position, the trim of the cylinder, and your overall balance in the water. This gives you the feeling of true sidemount setup, with no back pain and makes you feel more confident and relaxed. This course was difficult but enjoyable. Every day started with a planning and theoretical session. Each day ends with a video review and discussion about the drills we performed in the water. The learning curve was steepened because we had a tendency to drain our cylinders whenever we were in the water. All was handled with professionalism and in a comfortable, safe environment. Steve will make this course easy for you. Steve will help to make you a better diver! read less

Technical Sidemount Scuba Dive Training Your Dog —

Note that qualifying certifications from other diver training organizations may apply - ask your Tec Sidemount PCB Instructor.

sidemountpcb.com is an essential component for recreational and technical divers. The beginning of my technical training was sidemount essentials. I completed a Tec40 / sidemount class in Florida before starting my training with Joe. Joe was able to concentrate on the in-water skills through online training. Although I had previously taken a Tec40 / sidemount class before starting my technical training with Joe, I consider that the start of my technical education sidemount essentials. Joe could focus on developing in-water skills through the online training. This was essential for cave training as well as all other technical training such trimix with Vas Profud. It demonstrates the high-quality inwater training that all divers should receive and accelerates in-water skill development. My daughter, who is beginning her journey into diving, watched the backmount dive videos before she started open water training. I am currently reviewing the instructor videos to make sure that I'm the best "buddy" I can be for her during her training process. These tools are vital in the safe development of technical and recreational divers. Daniel Glynn, father and cave diver

Technical Sidemount Scuba Dive Training The Street

You'll learn about the advantages of diving with a sidemount configuration and how to set up a tec sidemount harness. You'll get hands-on training during one confined water session and four open water dives where you'll start with two tanks and add at least two more, maybe even getting to six sidemounted cylinders.

This was an enlightening experience that I had with your online course. While I've had limited experiences with other instructors over my scuba "career", I can honestly say I've never seen so many practical, useful and deep explanations of how to become a better diver. I had difficulty with buoyancy control while trying to take my PADI AOW course. While I had limited experiences with instructors in my scuba "career", I can honestly say I have never experienced such useful, deep, and practical explanations of how to become a better diver. My buoyancy control was an issue when I attempted to shoot my SMB during my PADI AOW course. My instructor told me how to improve my buoyancy. He suggested that I just practice. He did have a good buoyancy, but didn’t explain to me how important proper weighting and breath control are. Your videos were eye opening. I was also surprised that none of my diving buddies understood why I wanted sidemount. Even highly-recommended instructors have questions about why I dive sm. It is what does it do? This is what cave divers do. I'm very glad that I chose sm. It is an entirely different world. While nobody really taught me or inspected how I do SM diving, I have been praised by others for my good trim. I learned everything through your videos. How to set up my equipment and how to exit or enter water. Also, how solve problems. I would love to have a training session with you, and we could meet. This is because I want others to be better divers. There are many outstanding instructors and divers out, but I'm sure your contribution is enormous and important to the scuba diving industry. I am grateful for this! Regards, Csaba read less

Technical Sidemount Scuba Dive Training Magazine
Technical Sidemount Scuba Dive Training The Street
8 Dive Shop

8 Dive Shop

Although I know that you are aware of this, I appreciate your videos online. I've used them to make my sidemount setup much easier. As an instructor, I was able to quickly diagnose student problems and help them. Thank you so much.

Technical diving requires divers to have at least one tank. Sidemount PCB, which allows you to create multiple cylinders and use them for technical diving, is becoming more popular. You can dive into the world of Tec diving by taking the Tec Sidemount PCB Diver class. Then, you can apply what your learned to other TecRec courses. Your instructor might suggest that you integrate this course with Tec 40/Tec 45/Tec 50 courses.

Submersible Pressure Gauge

If you've looked into technical diving, you realize that tec divers always wear more than one tank. Sidemount PCB is an increasingly popular way to configure multiple cylinders for technical diving. You can enter the world of tec diving with the Tec Sidemount PCB Diver course and apply what you learn to other TecRec courses. Your instructor may offer to integrate this course with the Tec 40, Tec 45 or Tec 50 courses.

Blue Label Diving proudly offers Sidemount PCB Diving Classes from SSI through TDI in Phuket Thailand. From recreational sidemount diving with two tanks to technical sidemounting for overhead environments in high-end settings, up to instructor level. There is one problem: once you are able to sidemount, you may never be able to go back to backmount dives.

Technical Sidemount Scuba Dive Training Houston Tx
Technical Sidemount Scuba Dive Training Houston Tx

Sidemount PCB Diving developed from cave diving in the early decades. Lamar Hires, an explorer, was the first to use multiple tanks to reach places where back mounted divers were unable to. As the sport developed, sidemount PCB diving has become one the fastest growing segments.

We provide courses for Recreational, Technical, Sidemount PCB, Overhead / Cave, Advanced Wreck, and Professional Development through the following agencies: SSI, SDI, TDI, ERDI, PFI, RAID.

Why do cave divers use rebreathers

Steve, just saw the new chapters to your online course. These are really great. They're especially helpful when you are reviewing videos or searching for specific parts of a movie. As soon as I saw them, I was able to start using them. Timo, cheers!

I just have this enlightening experience with your online course. I had few experiences with other instructors in my scuba 'career', but I can honestly say that I never saw such a useful, deep, and practical explanations about how to become a better scuba diver. When I did my PADI AOW training, I was struggling with buoyancy control as I tried to shoot my SMB.... read moreI just have this enlightening experience with your online course. I had few experiences with other instructors in my scuba 'career', but I can honestly say that I never saw such a useful, deep, and practical explanations about how to become a better scuba diver. When I did my PADI AOW training, I was struggling with buoyancy control as I tried to shoot my SMB. I asked my instructor how to improve my buoyancy. He said just practice. He had a good buoyancy control surely, but didn't explain to me about the importance of proper weighting, breath control, etc. Your videos were eye opener. Not to mention that every one of my dive buddy didn't really understand why I wanted to dive sidemount. Even now highly recommended instructors ask me why I dive sm. What is the use of it? Mostly cave divers do it. I am very happy that I did choose sm. It is a different world. Nobody really taught me or checked how I do SM, but many times I dive with others, they mention how good my trim is. I learned everything from your videos, how to setup my equipment, enter or exit water, or solve problems, etc. I hope we can meet sometimes and can have a training together, because I want to improve and help others to become much better, quality divers. I am sure that there many excellent divers and instructors out there, but I am sure that your contribution to the scuba diving society is huge and very important. Thank you for that! Regards, Csaba read less

Check our other pages :

Frequently Asked Questions

from 130 to 148 feet
Those who are already decompression certified can immediately qualify for rebreather decompression dives. Individual training agencies set depth limits ranging from 130 to 148 feet (40 to 45 meters).

332.35 m
Hello and welcome to the Officially Amazing universe. Ahmed Gabr. Ahmed, 41, of Egypt, has broken the record for the deepest SCUBA dive, diving 332.35 m (1,090 ft 4.5 in) in the Red Sea off the coast of Dahab.

According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.