Beam Coping Machine Meaning
The basic unit is semi-automatic, with oxy-fuel coping machines. The operator positions and finetunes the workpiece before it is cut. The laser can also be set up automatically to auto-probe and adjust the torch height. The basic unit has powered conveyors. Before cutting, the operator must manually measure and mark X on the feedstock. The optional laser measuring of the feedstock can also be used as an automated measurement system. The interface allows the operator input the material type to which they want to cut. The operator navigates through a variety of options by using the touch screen to see pictorial representations. The computer program includes all dimensions of structural steel AISC. A fully dimensioned deal drawing is displayed to simplify programming, save time and reduce operator input errors. The operator has the ability to modify or override the input. It can also be saved as an additional program, if needed. DSTV exported drawings can also be used to pre-programme your machine. An operator can use the wireless remote control to operate, start, stop and manage the equipment. The wireless remote control allows the operator to easily view the equipment from any angle that is needed to verify and maintain accuracy. Operator marks the material, moves the material in the right position and clamps it hydraulically to ensure that the material is cut correctly. The laser operator aligns the laser to the mark, then begins the process. The torch lightens and pre-heats the material. The operator initiates and finishes the cutting process, as long as he maintains the correct torch height.
Voortman Clipper CNC Angle Line, Voortman CNC Beam Drill Line, and Voortman Clipper CNC Angle Line made it possible to automate beams and angles at a reasonable cost for the small-tomedium fabricator. Now the Voortman Liberty allows automated beam handling in shops that wouldn't otherwise be able to afford it.
We prefer to have the machine installed indoors. However, we do have several Voortman beam cooper installations outside. But the machine and its control panel should be protected from the elements. Contact us for photos of any of our outside installations.
We have installed more then a thousand CNC beamlines and angle lines across the globe. We have found that the average operator who has never programmed any machine before can become proficient on it in less half a day.
At the time of machine installation our factory trained service tech will spend approximately 5 days on site, installing your machine, calibrating it and re-training your operators. This will provide more than enough hands on operation, as well as maintenance, troubleshooting and diagnostic training.
Dragon’s front position gate and chuck is easily adjustable, making the load and setup between different shapes and sized materials a breeze.
Structural Steel is used for the construction of nearly every type of structure including bridges and buildings. The designs of these structures are subject to considerable variation. Steel beams must meet exact specifications as outlined in blueprints. Steel beams need to be cut to the proper size and thickness.
Multiple torch or triple torch CNC beam coping machines typically have three torches, and each torch is dedicated to a flange or web. Even though there is less positioning time with the triple torch machine than there is with the single torch machine, the single torch machine can do a lot more cuts than the EXISTING triple torch machines due to the versatility of the 5-axis movement of the cutting head. In addition, most triple torch machines cost 3-4 times more than our single torch CNC beam coping machine.
Voortman has been built for Gulf States Saw & Machine Co. only. Voortman takes care of installation, warranty work and service. Voortman provides the service, but Gulf States Saw & Machine Co. is available to assist if required.
The basic unit is an oxy-fuel, semi-automatic coping machine. The operator places the workpiece and finetunes it before starting the cutting. An automated laser option is available to automatically probe the workpiece and adjust the torch height. The basic unit includes powered conveyors that allow the operator to manually measure and mark the length of the feed stock before cutting. Optional automated measuring system using Laser measurement of feed stock is available. Operators can input the material type they wish to cut via the interface. The computer touch screen allows the operator to scroll through a selection of options using pictorial representations. All dimensions of the AISC structural steel are programmed into the computer. The computer displays a fully dimensioned cope drawing, which simplifies programming and minimizes operator error. Operators can modify and override the input, and it can also be saved as a new program, as desired. You can pre-programme the machine from your office using DSTV exported drawings. The operator can use a wireless remote to control the equipment. The Operator can view the equipment from any angle he needs to ensure accuracy and verify operations. The operator marks the material and moves it into position. Finally, hydraulically clamps the material for cutting. The laser is aligned to the operator's mark by the operator and the cycle begins. The torch is ignited, pre-heating material. Operator initiates and finishes the cutting process manually, ensuring that the torch height is maintained.
Along with the basic unit that has some optional upgrade features, there is also the fully upgraded APC 1200. It has combination plasma and oxy-fuel cutting with both torches mounted on a pivoting head. They will flip one to the other interchangeably via computer control in a second without having to do anything manually. The machine is operated primarily with the Plasma to maximize efficiency. It is preprogrammed to automatically switch to the Oxy Fuel when the material thickness is beyond the cutting capacity of the Plasma. This upgraded unit comes standard with the laser probing for automatic height adjustment.
"..the Liberator helps us save time cutting the beam. We also get to save time fitting the 2 pieces together. It does this so well that there is no need for additional trimming. We can no longer fill gaps when we weld. We save time on both the fitting of the structure and the welding. The Liberator saves me time, and I'm not even referring to the grey hairs.
Voortman's 24-hour tech support can resolve 90%, but there is an extensive network of 50+ Voortman service personnel who are stationed in North and South America as well as Europe, Africa and Asia.
With Voortman on your side, you can reduce the production time of your operations by 80%, an impressive return on investment. This industry-leading beam coping machine includes free and unlimited support for life, and we offer turnkey installation and training anywhere in the U.S.
What are some common strategies for coping? Lower your expectations. Ask for help from others. Accept responsibility for your situation. Participate in problem solving. Keep emotionally supportive relationships. You can express your distressing emotions or maintain emotional composure. You can find more items.
1- T beams have a greater second moment inertia than ordinary beams. This means they are more resistant to bending.
Price of 30 ft lvl beam: The average cost/price of LVL is $3-$12 per linear foot. For 30 ft. lvl beam price, 30x3 = $90, 30x12 = $360. This means that 30 ft. lVL beam, Laminated veneer lumber, or Engineered beam costs between $50 and $200 for materials, or between $90 and $360 for installation.
To remove more wood from the back, angle the coping saw 30 degrees. Pro tip: Trimmings that have been cut with coping cuts can often leave thin, pointed tips. To prevent them from splintering, support the tips with your finger while you file, cut, or sand.
The strength tolerances of the C-beam are lower than those of the I-beam. This results in lighter components. Continue reading if you have never used C-beam profiles. Let us walk you through the basics to help you decide if it is right for you.