Laser fabrication solutions that meet your exact needs are available. They also offer process efficiency and quality for metal and non-metal fabrication.
Laser systems for electronics manufacturing are fast and high-precision and can be used to cut, mark, weld, mark, or ablate metals and other materials.
PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.
StarFiber Series includes compact fiber lasers and optional focusing heads to allow for cutting or laser welding. SmartWeld(tm), a technology that allows for fine and large welds, can also be used.
With Coherent laser systems, you can achieve precision in medical device manufacturing.
Combined laser system for tube and sheet metal cutting.Tubes up to Ø 4.72" (120 mm)Sheets up to 236" x 79" (6000 mm x 2000 mm)Fiber Laser
StarCut Tube laser tube cutter offers unsurpassed precision. It can cut contours up to +/-5um.
You might have noticed that cutting speed has not been discussed yet. While it is possible for a tube to be cut at up to 500 inches per min, that is not always possible. Laser tube cutting requires that you focus on the time it takes to load a tube and index it in order to cut. Laser tube cutters are slow and take a lot of time to process parts.
Gulf States Saw & Machinery Co., Inc. works closely with you to create a program that meets your specific needs. We will examine the current production of your part, determine its end use and application, and then work with you to meet your needs.
Imagine you are required to place a throughhole in a tube. The tube must be centered at the correct dimension. The tube should not be bent. That's tube fabrication.
This fully-automatic solution guarantees maximum productivity as well as rapid production changes. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser
Cambus Medical uses Coherent StarCut Tube and Select Laser Welders laser-powered tubes cutting machines to create business success.
Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.
Monaco high-power Femtosecond Lasers offer exceptional edge quality in micromachining, and improves in scientific applications such three-photon Microscopy.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.