Cnc Beam Drill Line Instructions

Cnc Beam Drill Line Rankings

Material handling allows multiple CNC machines to be connected and maintains material flow through a shop. This allows fabricators the opportunity to continue growing as their business grows. Only the Advantage-2 high-speed drilling line can produce 150 tons of metal per 40-hour working week. This is the perfect drill line for small and large fabricators worldwide. Complete stop. Voortman puts the success and well-being of the steel sector as his top priority. This is why we offer unsurpassed support and service. For more information about the most difficult steel fabrication machinery worldwide, contact us to request a demo. Voortman, we are stronger than any steel.

The Franklin HD145 (3) drill spindle CNC spindle, 44-inch wide. The HD-145 can support beams upto 775 lbs per ft. The hi-performance spindle design offers drilling speeds up to 2,200 RPM. This rigid design can deliver extremely high feed rates upto 300 feet per second. The Franklin HD145 is available with many material handling packages ranging in weight from 300 lbs/foot to 750.

Cnc Beam Drill Line Rankings

Spindle

Advantage-2 carbide drill line uses automatic tool changing technology, completely electronic ball screw-feed spindle motion, and fully electronic ball screws feed spindle. These combined with Voortman’s outstanding build quality and design make the Advantage-2 carbide drill line an ideal combination of strength and agility.

This Morse Taper chuck adaptor allows you to use standard parallel shank drill bits when drilling smaller diameters. It allows a maximum drill diameter of ?” (12mm) and a minimum diameter of 3/64? (1mm)

Angle Iron

Angle Iron

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

GSS Machinery's magnetic brush (and broom) help remove chips from the machine as well as sweep up chips from floor.

Machines

The UNIST MQL lubricant has evolved to be the most popular coolant system in America over the past ten years. It is now standard equipment on Aveger FORTY, Avenger PLUS, and Clipper. This low-intensity lubricant, which is oil-based, promotes longer tool life. It is safe for use.

The intelligence of a Voortman designed beam drill line is not only in its own capabilities but in its ability to be plugged into any environment through its modularity. Tandem solutions with band saws, robotic coppers and PeddiWriters further expand the shop's throughput positioning for a more economic approach when the steel industry cools down and a more aggressive approach when it heats back up. Voortman designed the Multmaster to help advance even the smallest parts into a tandem bandsaw. Utilizing the whole profile and minimizing the remnant leads fabricators toward better profits. More output? Check. As with any Voortman CNC drill line profit wouldn't be possible without material handling. Not only do fabricators lose money every time a profile is manually moved, but material handling is much safer for transferring the heaviest profiles when compared to fork trucks or cranes.

Machines

Cnc Beam Drill Line Error

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Advantage-2 uses a variety of support clamps to ensure maximum rigidity through the machine. Carbide tool life can be extended by reducing vibrations as much as possible.

Cnc Beam Drill Line Viscosity

Saw measurement options are available via the Voortman AccuMeasure Roller Feed measurement system. The AccuMeasure allows for complete handling versatility, while maintaining a streamlined CNC solution. Splitting apart a drill and a saw allows neither machine to wait for the other, maximizing production.

This range can move along the profile easily and offer a wide range of automated functions. It can process I andH beams, channels and flat bars, angle irons, channel, rectangular tubes, square tubes, and T bars respectively. Automated processing of already assembled metal profiles is possible without the need for programming.

Machines

Check our other pages :

Why do we use T beam

Yes. Yes. We have numerous CNC Beam Drill Line installation outside. However, the control panel and the mobile platform must be protected from the elements. Contact us for photos of outside installations.

Advantage-2 carbide drills are equipped with electronic ball screw feed spindle motors and an automatic tool changer technology. Combining these features with Voortman’s well-known build quality as well as mechanical design, the result is a combination that combines agility and strength.

Frequently Asked Questions

Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.

Direct push technology is often called DPT. It uses the static weight combined with a hydraulic wrench to advance instrumentation or tooling through the subsurface. The drill cuttings cannot be removed from the hole unlike rotary.

CNC-controlled programming allows beam drill lines to accurately drill holes in various steel profiles. These machines can be used to cut holes in a variety of steel profiles without the need for you to manually draw or lay out the positions.

As a minimum beam diameter, all structural engineers recommend a 12mm dia bar.

Because of their small cross-section area (known by the web), I beams require minimal material. However, they can still achieve the desired shape and function to carry out their load bearing duties. This design allows the I beam to bend under stress, rather than buckling.