Cnc Beam Drill Line Repair

A CNC drill line is useless if it does not position a fabricator for success in the steel fabrication industry. The Advantage-2 can process technical programs quickly and with intelligence. Each drilling axis is equipped with three five-station tool changers. They can drill, mill countersink tap, tap, and scribe. You can also equip this drill line with a Signoscript underside Scriber or Signomat Part Stamping Unit. Even after blasting, painting, and galvanizing, part information can be retained. Minimizing shop errors? Check. Check. High torque drilling axes feature a thicker, more aggressive cut that removes more chips with every rotation. This drill line can chew through beams and tube, channel, angle, tube, and flat bars. Advantage-2 has a processing window that measures 44 inches in width and 18 inches high.

Voortman CNC Beam Drill Lines are often part of a Drill Saw Line combination or larger fully integrated production lines. These are also known as Multi System Integration. Read more below!

The UNIST MQL coolant system has been the standard equipment on the Aveger FORTY and Avenger PLUS. This oil-based coolant promotes longer tool lives. It is not toxic.

Z-Reader Probe- The Z-Reader probe is used to map the surface. You can control it manually or programmatically. It is not active during cutting and can be retracted to keep it out of harm's path. You can trigger it to check the surface at each pierce before cutting begins. Or, you could use it to drive the surface mapping of the entire part. It starts with the initialization of the device to the surface at program start. The difference is then accumulated or tracked.

"..We have drilled approximately 25,000 hole since we purchased our CNC Beam Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

CNC Beam Drill Lines are space-efficient beam processing solutions. They require a minimum of 70ft by 9ft floor space. This makes it perfect for smaller fabricators and fabricators who have limited space. Many CNC Beam Drill Line installations are located outside, which allows for more fabricator space.

Auto Stand-Off is currently defined as surface stand-off. It should not be confused with vector standoff in 5-axis mode. Auto stand-off currently works on a changing surface. It adjusts vertically based upon the angle of the Axis. This means that five (5) axes are taken into consideration during calculations. However, this is not the same thing as tool vector standoff. You can change the vector standoff while the machine runs manually by pressing buttons on the screen.

Material handling allows fabricators to connect multiple CNC machines and keeps material moving through their shop, allowing them to grow with the business. The Advantage-2 high speed drill line can process up to 150 tonnes of steel per 40-hour work week. This drill line is ideal for small and large fabricators all over the globe. Stop. Voortman is committed to the success of the steel industry. Our support and service are unmatched. To learn more about the most powerful steel fabrication machinery, request a demo, quote or visit. Voortman is stronger than steel.