Cnc Beam Drill Line Specs

The CNC Beam Drill Line, which can be used to fabricate structural steel or miscellaneous metallics, was immediately a hit with small to medium size fabricators. Since 2003, more than 600 CNC Beam Drill Lines were installed all over the globe. This incredible machine has transformed the lives many a steel fabricator.

Automatic Edge Finder – The edge finder is or can be utilized manually (Jogging Method & Screen Buttons), programmatically (M & G codes), or fully automatic routine (dedicated program). This option sets offsets & program rotation to match the orientation & location on the cutting table.

Powered by 25 HP (18.5 kW) Siemens spindle motors, the Advantage-2 is outfitted with 3 drill spindles, each equipped with 5-station tool changers. This powerful drilling technology allows for maximized operating time and drill hole quality.

Auto Standoff - This is a surface standoff, and should not be confused in any way with vector standoff using 5-axis mode. Auto stand-off will adjust vertically according to the angle of "A" Axis. There are five (5) axis that are considered during calculations. The machine can be controlled manually using buttons on its screen to make the vector standoff change.

GSS Machinery is often asked by customers which drill bits they should use: insert bits or twist drill bits. We want to make sure that our customers get the lowest possible cost per hole. This will allow them to be more competitive and profit. It is vital that customers fully understand the Insert Drill Bit (Spade Drill Bit) advantages.

Remote assistance cannot diagnose every problem. Frequently, mechanical issues and questions that require the attention of a human eye are still being addressed. Voortman machines come with high-definition web cameras and software. This allows Voortman employees the opportunity to see the installation in action without leaving the office. This webcam is invaluable in countries where English might not be an option or situations in which it may be difficult to communicate effectively.

The Advantage-2 is powered with 25 HP (18.5kW), Siemens spindle motors. Each drill spindle has 5-station tool changers. This advanced drilling technology ensures maximum operating time, drill hole quality and efficiency.

Over the last ten years, the UNIST MQL cooling system has emerged as the dominant system for coolant in the USA. It is standard equipment on the Aveger FORTY/Avenger PLUS and Clipper. This minimal quantity coolant is made from oil and promotes longer tools life. It is non-toxic.