Cnc Drill Line And Tap Machine

Z-Reader Probe-The Z-Reader Probe is a device that maps the location of the surface. It can be programmed or manually controlled. It can be disabled while cutting, and it can be pulled out of harm's reach. It can be activated to verify the surface at each pierce prior to cutting, or to drive surface mapping for the entire part before cutting begins. It is used to initialize or zero the device to the desired surface and then tracks or accumulates the difference between that zeroing effort.

When the Voortman service technician has finished installing and calibrating your machine he will spend time with your operators taking them through our simple yet thorough training program. Your operators will receive training in:

FlexBeam, a machine tool that produces steel profiles quickly and accurately, has just been launched. This machine can be used to process large jobs in small and medium-sized fab shops.

These drop-in, serrated grippers are used to secure flat bars, base plates, angles, and other profiles with rounded edges.

Voortman machinery is the worldwide leader in structural steel fabrication technology. Voortman machines provide steel fabricators with an advantage in the steel sector and allow them to maximize tonnage. Advantage-2 CNC beam drill is the core of any structural-steel fabrication shop. This machine is the heart of it all. It can drill endless carbide holes at high speeds, with multiple spindles, and at high speed. Advantage-2 is the most productive drill line in the steel sector. This drill line supports shops over the long term thanks to its heavy steel frame. The Advantage-2 is able to run profiles from one end to the other without any stops in production thanks to its roller feed design for the outfeed and infeed. Many fabricators around the globe use their Advantage-2s every year to make hundreds of thousands of tons steel.

Although 90% of support issues can be resolved by Voortman’ 24 Hour Tech Support center, an expansive network of 50+ Voortman field service personnel are stationed throughout North and South America, Europe, Africa, Asia, Russia, the Middle East and Australia/New Zealand.

Yes. Outside, we have many CNC Drill Lines. It is important to provide weather protection for both the control panel, and the moving mobile platform. To view photos from many of the outside installations we have, please feel free to contact our office.

Auto Standoff - This is a surface standoff, and should not be confused in any way with vector standoff using 5-axis mode. Auto stand-off will adjust vertically according to the angle of "A" Axis. There are five (5) axis that are considered during calculations. The machine can be controlled manually using buttons on its screen to make the vector standoff change.