Cnc Drill Line 08
Programming of the CNC Drill Line is very simple even when done manually. The machine programming software is Peddimat and most operators can learn how to program most parts in less than an hour. Of course practice makes perfect. However the best way to program the machine is to import parts directly from a CAD drawing preferably done in some 3-D modeling software such as Tekla Structures, SDS/2, ProSteel 3D, StruMis etc. These files import directly into the machine and the operator merely selects the part to be processed and hits the Cycle Start button.
The CNC Beam Drill Line, which can be used to fabricate structural steel or miscellaneous metallics, was immediately a hit with small to medium size fabricators. Since 2003, more than 600 CNC Drill Lines were installed all over the globe. This incredible machine has transformed the lives many a steel fabricator.
We have successfully installed over 1000 CNC Drill Lines and Angle Lines all around the world. It has been our experience that an average operator who has never programmed a machine before can get up to 50% efficiency on it in less than half a day.
As customers often bring a few pieces of steel with holes or layout marks, we train the operator to use Peddimat.
Voortman created today's CNC beam drill standard using time-tested technology. Advantage-2 processes on average 150 tons of steel per week. Advantage-2 uses the most efficient drilling and milling operations, including tapping, tapping, and countersinking.
We believe that for now, based on current pricing from the various suppliers, the customer is better off with good quality Ocean Penetrator twist drill bits and a good quality sharpener.
GSS Machinery gets asked often by our customers which drill bits to use. Should they use twist drill bits, or insert bits. As this will help our customers be more competitive and more profitable, it is our number one goal to reduce the cost per hole. But it is crucial that they understand all of their options. Insert Drill Bit (Spade Drill Bit). Advantages
GSS Machinery's magnetic brush, broom and magnet brush help to remove chips from machines and sweep up chips on the floor.
".. This machine is intended for structural fabricators. However, I was able to see that it would be a good fit for drilling truck frames. Assembly was easy because of the repeatability and accuracy. Avenger drills the channels for one truck in two hours. If we were to do this manually it would take 16 hours. The Avenger has greatly increased our productivity and profitability !.."
Advantage-2 utilizes a number of support clamps to maintain the maximum rigidity of the workpiece. Carbide tools last longer if there is as little vibration as possible.
The CNC Drill Line works very well and Avenger operators were often the ones doing the layout. It is not necessary to have any computer knowledge. Full training is given at the time the installation is completed.
Voortman machines have been the global leaders in structural steel fabrication technology. Voortman machines are a key part of steel fabricators' competitive advantage. They can optimize tonnage and maintain a high level of quality. Advantage-2 CNC beam drilling is the heart of any structural steel fabrication shop. This machine is a core component of a high-speed multi-spindle, relentless caride drilling. Advantage-2 is one of the most profitable lines in the steel industry. This drill line is built from heavy steel and will last for many years. Thanks to the roller feed design of the infeed/outfeed, the Advantage-2 can run profiles from end to end without any stop in production. Every year, hundreds of fabricators around the world run hundreds of thousands and tons of steel through their Advantage-2s.
CNC Drill Line is a space-saving beam processing solution. It only takes up 70ft x 9.9ft. This makes it great for fabricators with limited space. CNC Drill Lines can also be placed outside, providing even more space for fabricators.
Voortman’s commitment to service and support is legendary and is the gold standard in the industry. Voortman offers a global team of customer support representatives that are always available at the Voortman 24 hour customer support center. Through state-of-the-art remote diagnostic software, readily available local field support, and the industry leading warranty, support from Voortman is only a call or a click away.
Section modulus (Z) is another property that can be used in beam design. Designing beams is crucially important because it determines the section modulus of the crosssectional shape. It is an indicator of the strength of the beam.
Avoid drilling vertical holes through LVL beams if the beam width is less than 3-1/2 inches. Before drilling vertical holes through LVL beams, consult an engineer or an architect who is qualified in wood design.
The Flange of the L-beam, or the T-beam's slab that acts in unison with the beam to resist loads, is also known as the Flange of the Slab. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams are the end beams.
Divide the beam's span in inches by 20 to calculate its required depth. A 25' span would equal 25x12 / 20, which is 15 inches. This beam's width would vary between 1/3 to 1/2 its depth.
The STANDARD SIZE OF BEAMS A residential building has a minimum of 9 x 12 x 300 mm or 225mm x 300mm. This is according to (IS codes). Minimum RCC beam size should not exceed 9 x 9 or 225 x 225mm, with an additional 125mm slab thickness.