Cnc Drill Line Underground

Cnc Lathe Drill Setup

The UNIST MQL Coolant System has emerged as the leading coolant system in the USA over the past 10 years. It has been standard equipment for the Aveger FORTY (Plus), Avenger PLUS (Plus) and Clipper. This minimal quantity lubricant is an oil-based coolant that prolongs tool life. It is not toxic.

The CNC Drill Line is a 100% hydraulic machine making maintenance and parts exceptionally affordable. The CNC Drill Line was designed specifically to be used throughout the world and thus uses only components from major manufacturers, most of which can be sourced in the local market. Voortman keeps all parts on hand for next day delivery in the USA. In most of our overseas countries we offer local service and support.

Ocean Avenger Cnc Beam Drill Line Price

The Advantage-2 CNC beam drilling machine is ideal for tandem installations with any Voortman automatic sawing system.

To ensure smooth operation and low maintenance, our beam drill machine machines come with linear guides and central lubrication. A 4-station tool changer is included in each coordinate system. It allows it to drill/mill, scribe/counter sink or tap as necessary. The tools can also be changed easily mid-operation. An arm attached to the rack and pinion on the feed conveyor is used to position the beam while it passes through the drill. Our steel beam drill lines are much more accurate that friction roller machines.

Cnc Drills Line Indexable

Cnc Drills Line Indexable

GSS Machinery's magnetic brush (and broom) help remove chips from the machine as well as sweep up chips from floor.

Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.

Spindle Drill

I truly believe that without the support provided by the staff and personnel at GSS Machinery we would not be performing in the steel fabrication markets that we now enviably find ourselves competing in..”

Powered by 25 HP (18.5 kW) Siemens spindle motors, the Advantage-2 is outfitted with 3 drill spindles, each equipped with 5-station tool changers. This powerful drilling technology allows for maximized operating time and drill hole quality.

Cnc Lathe Drill Setup
Spindle Drill

Q Code Cnc

Auto Stand-Off is currently defined as surface stand-off. It should not be confused with vector standoff in 5-axis mode. Auto stand-off currently works on a changing surface. It adjusts vertically based upon the angle of the Axis. This means that five (5) axes are taken into consideration during calculations. However, this is not the same thing as tool vector standoff. You can change the vector standoff while the machine runs manually by pressing buttons on the screen.

Voortman's beam drill line design is intelligent not only because of its capabilities, but also because it can be easily plugged into any environment due to its modularity. Tandem solutions that include band saws, robotic coppers, and PeddiWriters expand the shop’s throughput positioning. This allows for a more economical approach to the steel industry when it cools down and a more aggressive approach as the industry heats up. Voortman created the Multmaster to make it possible for even the smallest parts to be turned into a tandem bandsaw. Fabricators will make more money by using the entire profile and minimising the remnant. Increase your output Check. Material handling is essential for any Voortman CNC drill lines to make a profit. Fabricators can lose money each time a profile has to be manually moved. However, material handling is safer than using fork trucks or cranes for the most heavy profiles.

Machines

GSS Machinery will provide you with as many options as you need when drilling with your CNC Drill Line.

The Advantage-2 is powered with 25 HP (18.5kW), Siemens spindle motors. Each drill spindle has 5-station tool changers. This advanced drilling technology ensures maximum operating time, drill hole quality and efficiency.

Spindle Drill

Check our other pages :

3 Spindle Drill Press

CNC Drill Line is specifically designed for fabricators or general job shops who need to drill holes through steel profiles of all kinds. The following questions can help you decide if this machine is right for your needs.

Z-Reader Probe- The Z-Reader probe is used to map the surface. You can control it manually or programmatically. It is not active during cutting and can be retracted to keep it out of harm's path. You can trigger it to check the surface at each pierce before cutting begins. Or, you could use it to drive the surface mapping of the entire part. It starts with the initialization of the device to the surface at program start. The difference is then accumulated or tracked.

Frequently Asked Questions

The dimensions of the steel bars required for beam and column are determined by the design structure, load on it, and span between two supports. For beam and column, the size of steel bars is generally 12mm to 25mm.

Metal cannot be cut by conventional drill bits so you will need a hard-working, heavy-duty drill bit. For metalworking tasks, there are two types of drill bits: cobalt and titanium.

Theoretically, a beam could be any length provided it was properly designed. The issue is one of practicality. Although it's theoretically possible to have an RC beam 16m long, it is very difficult to have a reinforcement bars that are longer than 12m.

Round tubes are the strongest by weight. It is more resistant to bending and twisting than rectangular or square tubing with the same chemical composition and dimensions.

It's also known as a "secondary beam". A secondary beam is one that rests on and transfers its loads to a primary beam, which then transfers them to the columns.