Cnc Drill Line Deal

Voortman inside service technicians often don’t need to be at your machine to solve a problem you may have. A common internet connection is all that is needed for the Voortman technician to operate your control as if he was standing with you at the machine. The Powerful Windows® based Siemens control used on Voortman equipment allows for this capability, and provides superior diagnostics via Windows® based platform.

Renishaw 5-Axis Calibration - This calibration unit is a Renishaw model APCA45, with a modified spherical tip. To remove dust and debris during activation, the device comes with a retractable cover. It attaches to a swing arm that is controlled by a pneumatic motor. This allows it to be out of the way during normal operation, and then swings into the calibration position.

Voortman's 24/7 Tech Support Center can solve 90% of all support issues. But, 50+ Voortman Field Service personnel are available throughout North and South America and Europe, Africa, Asia and Russia.

The Franklin HD145 (3) spindle-cNC drill is 44 inches wide. The HD-145 can lift beams of up to 750 lbs per feet. The high-performance spindle design allows drilling speeds of up to 2000 RPM. The rigid design of the spindle allows for very aggressive feed rates, up to 300 ft per minute. There are many material handling options available for the Franklin HD145, from 300 lbs to 750 pounds per foot.

"..We have drilled approximately 25,000 hole since we purchased our CNC Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

Yes. Many CNC Drill Line installations are available outside. The control panel and mobile platform must have adequate weather protection. We are happy to show you photos from our many outside installations.

Let's look at Twist Drill Bits versus Insert Drill Bits in a real-world fabrication situation. Let's just focus on one example: 13/16" (22mm), which is the most common drilled hole diameter.

“..Since purchasing our CNC Drill Line about four months ago, we have drilled approximately 25,000 holes. It used to take us approximately 5 minutes to lay out and drill each hole. Now it takes us approx. 30 seconds per hole … a savings of 1875 man hours in 4 months. In our shop that equals about $84,375! As you can see this machine will pay for itself in less than one year. Not only is it speeding up our production, it is freeing up floor space for additional jobs..”