Tube Lasers Cutting Systems Europe

A CO2 laser requires more power to produce than a fiber laser. This makes it less efficient and has lower wall plug efficiency. You will also need to use more power for the large CO2 laser chillers. Because the fiber laser-resonator's wall-plug efficiency is greater than 40 percent, it uses less power as well as less of your in high-demand flooring space.

A laser cutting machine can make a sheet of sheet metal in seconds. However, a laser tube cutting machine can achieve the same results. It is quite different from how it works.

The high cutting speed of CO2 lasers is what makes them stand out. Their main application area is the medium-to-high range of material thicknesses. The laser beam cuts with high precision and is free from burrs. This allows the parts to be processed further without needing to be reworked.

Fiber lasers can be used to cut reflective materials and provide precise cutting. They are almost maintenance-free. They can also cut certain thicknesses of metal faster than CO2 lasers. But speed is only relative when cutting tube. Speeding up the process of cutting tube and producing finished products can make time savings.

Our system solutions have the most flexible selection available for small and large-scale production. They are available in diameters of 10 to 324 mm and lengths of pipe and profiles up to 12.5 m.

Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting systems integrate intelligent machine functions which include intelligent monitoring, setup and cutting functions. These automated functions improve ease of operation and machine efficiency. The extensive range of capabilities of Gulf States Saw & Machinery Co., Inc.’s tube and pipe lasers makes these machines ideal for many industries and a variety of applications.

You may have noticed we haven’t covered cutting speed. Although you can cut up 500 inches per minute using a tube cutter, it's not always practical. Laser tube cutting involves focusing on the time required to load a tube, index the tube so it's in a good position for cutting and then pierce, cut and unload the part. It is not about cutting speed, but part-processing time when laser tube cutting machines are used.

High cutting quality is one of the main characteristics of CO2 Lasers. Their primary application is in medium to high material thicknesses. The laser beam's cutting edges offer high throughburr and low scoring. This makes it possible to process the cut parts further without having to rework.