Tube Lasers Cutting Systems Minneapolis

StarFeed is an automatic loader/unloader that is compatible with the StarCut Tube laser cutting machine. Available in sizes S and S, this combination allows for automated dry or wet cut of tubes from 1-200 mm in diameter. StarFeed L is capable of storing up to 48 tubes. Its sensor-controlled gripping unit avoids damage. The result is a large increase in productivity.

You have the option of choosing between 2D and 3-D laser cutting technology. This allows you to make precise and customized cuts in a variety of parts, including tubes with rectangular, square, or rectangular shapes. There is also the possibility to cut profiles with diverse cross-sections (for instance, H, U, T, or Ucross sections). 3D technology not only allows straight cutting edges but also permits bevel cuts up to 45 degrees. This versatility means that you don't need to spend a lot of money on milling. Drilling. Punching. Sawing.

There is no need to coordinate multiple orders or vendors. Gulf States Saw & Machinery Co., Inc. handles everything, from material procurement to past deliveries.

How can you compensate for this? Traditionally, you will touch your face with a sensor marking the contact point. The tube is then rotated and the opposite end of the tube touched. The control will then be able to see how bent the tube looks. This allows for precise measurements and ensures that the through-holes will work properly. Keep in mind, however, that every rotation of the tube reduces the ability for very high tolerances.

With laser generating technology, sheet laser cutting machines can now be sold with power outputs up to 12kW. A laser tube-cutting machine usually has a power consumption of 5 kW. Any more power would cause the tube to be cut on both sides simultaneously.

StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

Lasertube lets you customize part designs to meet the needs of your customers.