Tube Lasers Cutting Systems

StarFeed can be used as an automated loader/unloader to the StarCut Tube laser cutting machine. It comes in two sizes, S and L. The StarFeed allows you to fully automate dry and wet cutting for tubes of any diameter from 1-20mm. StarFeed L can store 48 tubes and allows processing of oval tubing. Its sensor-controlled gripping unit avoids damage. The result is a substantial increase in productivity.

You might have noticed that cutting speed has not been discussed yet. While it is possible for a tube to be cut at up to 500 inches per min, that is not always possible. Laser tube cutting requires that you focus on the time it takes to load a tube and index it in order to cut. Laser tube cutters are slow and take a lot of time to process parts.

How can you compensate? Traditionally, you would touch the contact points by coming down. Next, rotate the tube and touch the opposite side. This will give the control an indication about how bent the tube may be. This can be used to ensure that through-holes fit the application. Be aware that this reduces your ability to deliver very precise tolerances every time the tube rotates.

Another thing to remember is that traditional methods of checking for twists and bows in the tube may take as long as five to seven seconds before cutting begins. You have to compromise accuracy for productivity with traditional touch sensing. This can be frustrating, especially in this age of fiber laser cutting. However, working with tube is much more difficult than working with sheet metal.

PowerLine C CO2 laser-based systems are used for precision drilling and cutting, scribing marking, engraving, and scribing on many non-metals such as glass, organic materials, and other non-metals.

This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser

You can eliminate secondary operations. A tube laser is able to cut a piece and add holes, or any other cutout design in one step. The ability to control tolerances on more complicated fabrications is gained. To ensure parts fit together in a single way, you can use one continuous piece. We can tube laser-cut aluminum, stainless and carbon.

Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting system integrate intelligent functions such as monitoring, setting up, and cutting. These automated functions increase machine efficiency and ease-of-use. The wide range of capabilities offered by Gulf States Saw & Machinery Co., Inc.’s tube and pipeline lasers make these machines suitable for many industries and a variety if applications.