Tube Lasers Cutting Systems Manufacturers

Some things are difficult to see until you have a closer look at the fiber laser operating. Fiber lasers have a larger power density than CO2 laser beams because their beam diameter is typically one-third that of CO2 beams. This allows fiber to cut more quickly and also allows it pierce better. This allows the fiber to cut intricate shapes with sharp edges and leaves a smaller beam size. Imagine that a fiber can cut the company logo from a tube with spacing of 0.035 in between its letters; a CO2 laser is incapable of doing this.

Every job shop has to have variety. Parts of different sizes may be obtained from the same tube. The machine must have the ability to load laser-cut parts, which can be as small at 2 inches. each other for a total length of 15 ft. It should also be able to load those parts without damaging them. This can sometimes be a problem with softer metals like aluminum.

Any job shop will have to offer a variety of options. This is also true for tube laser operators. It is not uncommon to see parts of different sizes coming from the same tube. It must be capable of loading laser-cut parts up to 2 in. The machine must be able to unload laser-cut parts as small as 2 in. and as long at 15 ft. one after another. It must also be capable of unloading those parts without damaging the rest. This is especially important for soft metals such aluminum.

The FABRICATOR is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The FABRICATOR has served the industry since 1970.

The CO2 resonator is much larger and requires more energy, as electricity is introduced to a combination of gases to produce the laser beam. Mirrors help the light gain in intensity, preparing it to exit the resonator. After exiting the resonator, the beam must travel through a path comprising several cooled mirrors until it reaches the lens. This travel causes a loss of power and quality in the laser beam.

It doesn't take much to make your in-house laser tube cutters easy or cost-prohibitive. Everyone can cut like a pro, even engineers.

Sheet laser cutting is a complex process that requires material loading and unloading automation. There are many solutions available. Tube laser cutting systems with vertical storage systems for tubes and section bars that can automatically handle bars and allow for unmanned production changes, on the other hand, have only been around for a few decades.

Lasertube systems, our 2D or 3D laser cutting system for tubes, bars, profiles and tubes from 12 mm up to 610mm (.5" to 24-") in diameter and 18 m (60") in length, are called Lasertube systems.