Before the new machine is packed, the water storage tank is emptied. Please make sure that the water tank is filled with water before turning it on, otherwise the pump will be easily damaged. When the water level of the water tank is below the green (NORMAL) range of the water level gauge, the cooling capacity of the chiller will slightly decrease. Please ensure that the water level of the water tank is within the green (NORMAL) range of the water level gauge. It is strictly forbidden to use circulating pump to drain water.
The auto-focus feature automatically adjusts the laser head position along the Z-axis as per the data received using the 3D camera.
FSL Muse Pandora is able to raster or vector engrave aluminum, steel and nickel as well as silver, titanium, copper, and stone.
Contact them via phone, e mail, or social media for after-sales assistance
Safety glasses should be able to block laser light from 1064 nanometers when purchased for this machine.
Discover the latest in laser technology, featuring the fastest speeds, highest-quality cutting, and our new IRIS™ Camera Positioning system.
The 30W fiber-laser can engrave in stainless steel at a angle of 90 degrees and at speeds of up to 3,543 ipm. This laser uses 100% of its power.
At the heart of a fiber laser is the laser source and they do not have any gaseous medium in it like in a CO2 laser.
The laser source is at the heart of any fiber laser. A fiber laser does not use any gaseous medium like a CO2 one.
I selected these fiber laser engravers after evaluating them on parameters such as size, material capability, laser power, upgrades, service, assembly, work area, laser safety, linear motion, and software used.
Mirror galvanometers are a group of mirrors located in the laser head. They move very quickly to alter the path of laser engravers. A 10 degree rotation at the head can produce 1 3/4 inches of movement at 10 inches. It can also be used for tracing the laser paths, before engraving or cutting.
Fiber lasers have a very small focal point which makes it impossible to cut through thick materials with them. In these cases, a CO2 Laser is the best option.
They offer a 30-day refund policy and a two-year parts warranty for all components and the FM-Desktop's fiber laser.
You can also use Photoshop, CorelDRAW and AutoCAD to create advanced designs.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Fiber lasers typically cost between $20,000 and $45,000.