Bodor
Fiber lasers are widely used for engraving purposes. Their wavelength ranges lie between 780nm and 2200nm.
MCWlaser PRO comes with an adjustable Z-axis. This can be moved manually using a wheel. Unfortunately, the XY or Y axes cannot adjusted.
Boss Laser's engineers and technicians offer technical support throughout the life of a customer through Boss Laser.
Some PVC-based acrylics can release toxic fumes if they are heated. It is better that you check the chemical compositions before engraving.
The laser arm is held by the support column (Z-axis). The laser focus can also be adjusted by moving Z-axis with the height adjustment knob.
The closer M2 values are to 1, the more laser energy is delivered to the laser spot. It allows for the processing of thicker materials, with deep wells that are thin.
Fiber lasers are widely used for engraving purposes. Their wavelength ranges lie between 780nm and 2200nm.
MCWlaser PRO comes with an adjustable Z-axis. This can be moved manually using a wheel. Unfortunately, the XY or Y axes cannot adjusted.
Boss Laser provides technical support through engineers and technicians for customers for life.
Fiber lasers are popular for engraving metals, as they can engrave much more accurately than generic CO2 Lasers.
People who use plasma always tell me they must watch over their plasma cutter. They say the plasma machine can start cutting wrong or get out of control (imagine seeing a plasma machine head swirling around in crazy motion?)
Muse Pandora can be mounted on an adjustable work table, as shown in the below illustration, to allow for precise engraving of such lenses.
MCWlaserPRO is available in half-assembled format. First, attach the vertical column connecting laser source and laser engraving modules.
You can reach them by phone, email, or via their social media accounts for after-sales support.
High precision field lenses for laser machines with a fiber-based laser source are used to increase energy density and collimate the laser beam at a single point.
How plasma works can get a little complicated. So, I’m explain as simply and quickly as possible. Plasma cutters basically heat up gas so much that it gets hot enough to melt metal. Then, when the metal is heated up enough to melt, it is blown away with gas to make the cut. There’s a complicated science behind this, but I’ll save that for another day! (or you can research on your own if you like).
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.