The average cost of fiber laser cutters in the market is around $39,800 based on the data from Amazon, Google, and STYLECNC.
Its footprint measures 8.3"x14.9", while its engraving machine module covers 13.8x22".
Fiber lasers use laser light to pump the fiber at the source. High-power laser diodes stimulate the active medium.
254mm, 330mm, and 420mm lenses require FSL Muse Pandora to operate in an open setup. Then only the laser can be effectively focused on the work material.
Fiber lasers can be expensive so if you are looking for a low-cost laser engraver, you should consider diode lasers.
MCWlaser PRO is available in half-assembled form. First, fix the vertical column linking the laser source to the laser engraving modules.
The machines can be used to cut steel, brass, aluminum, and stainless steel. These fiber laser machines will reduce maintenance costs and lower operating expenses.
FSL Muse Pandora allows you to raster engrave on aluminum and steel as well as nickel, copper or silver.
The ELEMENT is a big step for automation that thrives in even the tightest spaces. Maximize your machine's potential, even in a small shop with limited floor space.
The laser module has a life of 100,000+ hours and can engrave with a repetitive precision of ±0.00039".
Fiber lasers are used to engrave on metals because they can engrave better than generic CO2 lasers.
It is suitable for engraving on metals and can engrave at a maximum speed 11.760 ipm. It can mark complex fonts and images on both smooth and uneven metal parts.
Gulf States Saw & Machine Co.'s FM1212-50S uses a Raycus50W solid-state laser fiber source with a life span of 100,000 hours.
This fiber laser can provide a repeatable precision up to +-0.0001" and a beam strength of less than 1 M2.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Fiber lasers typically cost between $20,000 and $45,000.