Plasma's workings can seem complicated. This is why I will try to explain plasma as clearly and quickly as possible. Plasma cutters heat up gas until it is hot enough to melt metal. When the metal is sufficiently heated to melt it, it is then blown off with gas to make the cut. It's complicated science but it's not what I will be focusing on. (Or you can do your own research if necessary).
Fiber lasers can be used in laser engraving and laser marking machines. A fiber laser is able to laser cut sheet metal, which is the main difference between it and a CO2 laser.
Laser cutting machines are remarkable because they can accurately cut metal. They can cut metal 2X faster than plasma cutters. Plasma lasers have a cutting accuracy of 0.1mm. Laser cutters can be used to cut metals with a cutting depth of.05mm or 0.02 inches.
FSL Muse Pandora from Full Spectrum Laser (FSL) has 20W, 30W, and 50W laser options available to choose from.
Some acrylic that is made of PVC emits toxic fumes when it is heated. You should always verify the chemical composition of the materials that you are going to engrave.
What it means is, when working with materials like metals that reflect laser beams, they will absorb fiber laser light at a much higher rate than laser light generated by CO2 lasers.
Triumph Laser has EZCAD2.0 laser control software that can be used with their desktop 30W laser engraver machine. EZCAD2.0 can be used to make simple shapes or text.
BREVIS 1212 AJ compact 3kW fiber laser is loaded with a diverse range of machine features to support high-speed processing, easy material loading, with a footprint and capacity to efficiently accommodate small cell manufacturing.
Laser machines can cut all kinds of materials. The material you can cut though will depend on what kind of laser machine you have. CO2 laser machine can’t cut through reflective metals like aluminum, copper, and brass. But they can cut through nonmetallic materials like wood and plastic.
2022 top rated fiber laser cutting machine is designed for metal fabrication, including steel, titanium, aluminum, brass, copper, alloy, gold, silver, and iron with different laser powers (1000W, 1500W, 2000W). Now the affordable fiber laser cutter for sale at a low price, with the best fiber laser cutting system service and support.
Laser uses light to make metal. Laser works by concentrating light into one point. Imagine a magnifying lamp that can focus sunlight onto a single point, then burn it. This is how cutting through light works.
MCWlaser PRO laser engraver has 20W, 30W, and 50W versions to choose from. These lasers have a wavelength of 1064nm.
Fiber lasers are solid state lasers. However, they are very different from diode and fiber lasers. This is because of the difference in their capabilities.
MCWlaser Pro laser engraver comes in three versions: 20W-30W, 50W, and 50W. These lasers emit a wavelength of 1064nm.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Fiber lasers typically cost between $20,000 and $45,000.