What is cheaper water jet or laser cutting
The laser beam generated is amplified, then fed to the cutting head via a flexible optical fibre.
The software interface can be accessed by typing in your machine's IP address on the browser's address bar.
The 30W fiber-laser can engrave in stainless steel at a angle of 90 degrees and at speeds of up to 3,543 ipm. This laser uses 100% of its power.
At the heart of a fiber laser is the laser source and they do not have any gaseous medium in it like in a CO2 laser.
The laser source is at the heart of any fiber laser. A fiber laser does not use any gaseous medium like a CO2 one.
I selected these fiber laser engravers after evaluating them on parameters such as size, material capability, laser power, upgrades, service, assembly, work area, laser safety, linear motion, and software used.
The laser beam generated is amplified, then fed to the cutting head via a flexible optical fibre.
The software interface can be accessed by typing in your machine's IP address on the browser's address bar.
FSL Muse Pandora is able to raster or vector engrave aluminum, steel and nickel as well as silver, titanium, copper, and stone.
Contact them via phone, e mail, or social media for after-sales assistance
They can import different file formats including DXF, BMP, DXF or AI.
A fiber laser can be limited in both the size of the work-bed and the materials that you can cut.
Before the new machine is packed, the water storage tank is emptied. Please make sure that the water tank is filled with water before turning it on, otherwise the pump will be easily damaged. When the water level of the water tank is below the green (NORMAL) range of the water level gauge, the cooling capacity of the chiller will slightly decrease. Please ensure that the water level of the water tank is within the green (NORMAL) range of the water level gauge. It is strictly forbidden to use circulating pump to drain water.
The auto-focus feature automatically adjusts the laser head position along the Z-axis as per the data received using the 3D camera.
It is a pulsed fibre laser with a wavelength 1064 nm. It is expected to last for approximately 25,000 hours.
It can engrave on metals at a maximum speed up to 11,760 ipm. It can mark images and fonts on metal surfaces, both smooth and rough.
The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.