Raycus laser is a well-known laser source brand that is used by many laser cutter and engraving manufacturers. Raycus will be mentioned in various places when you look through the catalogs of different laser manufacturers. This simply means that all of these machines use a Raycus Fiber Laser Technologies Co. Ltd. laser source.
Fiber lasers are revolutionizing laser metal cutting industries with their low maintenance costs, high cutting efficiency and lower cost.
Triumph's 30W desktop fiber-laser can engrave on aluminum and gold, silver and stainless steel. It also works with some plastic-like materials for machine parts and tools.
Plasma on the other hand can effectively cut any kind of metal up to 80mm thick or 3 inches. Interestingly, plasma can start cutting faster than laser when cutting thicker materials.
F-theta(?) is used by the laser module. A lens with high energy uniformity, narrow focal spot and low attenuation.
After considering their dimensions, material capabilities, laser powers, upgrades, maintenance, service and assembly, the laser safety, linear motion and software use, I decided to purchase these fiber laser-engravers.
Muse Pandora can be mounted under an adjustable desk as shown below for engraving effective images when you use such lenses.
Gulf States Saw & Machine Co., newest laser machine combines our top-of-the-line technology and our latest features in a compact desktop format, with a 30-watt fiber option for marking metals and engineered plastics.
The major thing that makes laser cutting machines great is that they can cut metal very accurately. They can cut 2X more accurate than plasma cutters. Plasma lasers can cut metals at an accuracy of 0.1mm or .004 inches. Laser cutters cuts: .05mm or .002 inches.
For after-sales services, you can contact them through phone, e-mail, or through their social media handles.
The support column (Z-axis) holds the laser arm, and the laser focus can be adjusted by moving the Z-axis using the height adjustment knob.
Since the working medium adopted by the laser generator is in the form of an optical fiber, its features are affected by the transition properties of the optical fiber. The pump light entering the fiber generally has multiple modes, while the signal photoelectric may have multiple modes. Different pump modes have different effects on different signal modes, making the analysis of laser generators and amplifiers more complicated. The doping distribution in the fiber also has a great impact on the laser generator. In order to make the medium have gain characteristics, working ions (that is, impurities) are doped into the fiber. In general, working ions are evenly distributed in the core. However, the distribution of pump light of different modes in the fiber is non-uniform. Therefore, in order to improve the pumping efficiency, the ion distribution and the pumping energy distribution should be as close as possible. When analyzing the laser generator, in addition to the general principle of the laser generator discussed above, it must also consider its own features, introduce different models and adopt special analysis methods to achieve good analysis results.
The laser energy delivered at the laser spot will increase the closer the M2 value to 1. It can process thicker materials through narrow deep wells.
Also, if you can get the cutting parameters right in laser cutting, you won’t have to worry so much about leftover cutting residue like dross.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.