Refraction bends the light in an optical laser. An optical fiber cable carries the light through a transparent, silica-free core. The core is coated with cladding. Cladding is another layer of silica doped in additional materials to lower the refractive index. Because they have a different refractive Index, the light will become refracted at their core-clad interface.
But we all know cost does not just stop when you first buy a laser machine. Both laser and plasma have cost associated with them for operating and maintenance. Things you need to consider are stuff like power consumption, maintenance, consumables, and labor (how much time/money it cost to operate the machine).
The beam quality of 20W- and 30-W lasers is below 1.5 M2, for 50W lasers it is under 1.8 M2.
Fiber lasers, which are low-maintenance and more efficient than traditional laser metal cutters, have revolutionized laser metal cutting.
As far as the material is concerned, the addition of the material itself or the coating on the material will produce components that are harmful to the human body at high temperatures, so it should be noted.
RetinaEngrave 3.0 can import files such as PDF, SVG and JPG from any CAD program of your choice.
Fiber laser machines have a higher efficiency rate at cutting thin materials than traditional cutting machines. A fiber laser machine has the ability to cut thin metals as small as 25mm. The fiber lasers will start cutting metal less effectively after that point. To cut ticker materials above 25mm (or 1 inch), you'd need high levels of power.
The focal diameter of a fiber laser is small, which allows it to focus the laser light with high intensity. This makes it an excellent choice in permanent high-contrast engraving applications.
Boss Laser delivers FM-Desktops preassembled. They also offer technical support at-site to their customers.
You can also check out their support page hosted using Zendesk. It has categorized sections that help you quickly find what you are looking for.
Plasma can also cut ceramics and glass. Because plasma is electrically conductive, it cannot cut things like wood or plastic.
The 20W version of FSL Muse Pandora can deep engrave silver at a speed of ~708 ipm utilizing 100% of the laser power.
Its laser source module has a footprint of 8.3" x 14.9", and the engraving machine module has a work area of 13.8" x 22".
Boss Laser offers technical support to their customers for life through their engineers or technicians.
The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.