Watts Brand
It is a pulsed fibre laser with a wavelength 1064 nm. It is expected to last for approximately 25,000 hours.
FSL Muse Pandora is able to raster or vector engrave aluminum, steel and nickel as well as silver, titanium, copper, and stone.
In fiber lasers, the optical fiber is pumped with laser light at the source using high-power laser diodes stimulating the active medium.
Raycus 50W fiber-laser can be used to engrave steel at 90 degrees angles. It uses 100% of the laser's power.
With plasma, you usually have to finish the cut with scraping or shaving because there’s leftover residue like dross.
All types of materials can be cut by laser machines. It all depends on the type of laser machine that you have. The CO2 laser machine cannot cut through reflective metals such as aluminum, copper, or brass. They can, however, cut through non-metallic materials such as wood and plastic.
It is a pulsed fibre laser with a wavelength 1064 nm. It is expected to last for approximately 25,000 hours.
FSL Muse Pandora is able to raster or vector engrave aluminum, steel and nickel as well as silver, titanium, copper, and stone.
Fiber lasers are limited in their focal point. This makes it difficult to use them to cut thicker materials. A CO2 laser is the best choice in such situations.
A fiber laser is the best choice to laser-cut/engrave aluminum, brass, and other metal pieces.
FSL Muse Pandora's 20W version can deep engrave sterling at a speed up to 708 ipm using 100% of its laser power.
Gulf States Saw & Machine Co. offers an EZCAD2.0 laser control program with the Gulf States Saw & Machine Co.'s FM1212-50S laser engraver.
You can reach the software interface by entering the IP address of your computer in the browser's Address Bar.
FM-Desktop can engrave on acrylic, plastics, brick, PVC, granite, marble, tile, aluminum, silver, steel, brass, and titanium.
Triumph's 30W desktop fibre laser will give you two lenses. Both lenses have a size of 4.3" x4.3", while the other has a 7.8” x 7.8” engraving area.
It is free to use, and it can be installed on Microsoft Windows XP (or Windows 2000), WIN 7, WIN8, or WIN 10 OS.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.