Muse Pandora can also be mounted underneath a adjustable work desk (as shown below) to enable effective engraving for such lenses.
Fiber lasers are widely used in engraving applications, and their wavelength ranges between 780nm - 2200nm.
Before the new machine is packed, the water storage tank is emptied. Please make sure that the water tank is filled with water before turning it on, otherwise the pump will be easily damaged. When the water level of the water tank is below the green (NORMAL) range of the water level gauge, the cooling capacity of the chiller will slightly decrease. Please ensure that the water level of the water tank is within the green (NORMAL) range of the water level gauge. It is strictly forbidden to use circulating pump to drain water.
MCWlaser PRO comes with an adjustable Z-axis. This can be moved manually using a wheel. Unfortunately, the XY or Y axes cannot adjusted.
Triumph's desktop fiber laser 30W can provide two lenses. The one gives you a 4.3"x4.3" engraving area, while the other allows for a 7.8”x7.8” engraving area.
The laser arm is held by the support column (Z-axis). You can adjust the laser focus by moving the Z axis with the height adjustment knob.
With a Raycus 50W fiber laser, you can etch or mark in aluminum at a 90° angle with a speed of ~4,680 ipm by utilizing 100% of the laser power.
Based on the 3D data, the auto-focus feature automatically adjusts laser head position along Z-axis.
Raycus laser has been a popular brand name for laser source brands. It is used by many different laser cutter/engraver manufacturers. Raycus is mentioned in many places as you peruse the catalogs from different laser manufacturers. This is simply a sign that all the machines mentioned in this article have a Raycus Fiber Laser Technologies Co. Ltd. source.
FSL Mouse Pandora (FSL), a Full Spectrum Laser (FSL), offers three laser options: 20W (30W), and 50W.
FM-Desktop allows you to engrave on acrylics, plastics and brick, PVC, granites, marbles, tile, aluminum, stainless steel, brass and titanium
Fiber lasers only have a narrow focal point so it is difficult to use them for cutting thick materials. A CO2 laser would be the best choice.
You can access the software interface by entering your IP address in the address bar of the browser.
The support column (Z-axis) holds the laser arm. The laser focus can be adjusted by moving the Z-axis using the height adjustment knob.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.
Fiber lasers typically cost between $20,000 and $45,000.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.