Motorsport Racing

Tube Laser Cutting Systems Job Work In Coimbatore

The solution with the widest working range in tube laser cutting.Tubes up to Ø 9.45" (240 mm)3D cutting modeCO2 or fiber laser

How do you compensate for that? Traditionally, you are going to come down and touch the face with a sensor that marks the contact point. The tube is then rotated, and the opposite side of the tube is touched. That gives the control an idea of just how bowed the tube is. This method is accurate and can ensure those through-holes work out for the application. But keep in mind that each time a rotation of the tube occurs, the ability to deliver very high tolerances is reduced.

Tube Laser Cutting Systems Job Work In Coimbatore

Automation

North America's premier magazine for the metal-forming and fabricating industries, The FABRICATOR, is THE FABRICATOR. The magazine contains news, technical articles, case histories, and other information that will help fabricators perform their jobs more efficiently. Since 1970, The FABRICATOR serves the industry.

You can eliminate secondary operations. A tube laser is able to cut a piece and add holes, or any other cutout design in one step. The ability to control tolerances on more complicated fabrications is gained. To ensure parts fit together in a single way, you can use one continuous piece. We can tube laser-cut aluminum, stainless and carbon.

Tube Lasers Cutting Systems Washington Dc

Tube Lasers Cutting Systems Washington Dc

StarCut Tube, a laser tube cutter machine StarCut Tube, offers unparalleled precision with contour cutting accuracy of +/-5um.

There is no shortage of variety in any job shop. Parts of various sizes are not uncommon when you use one tube. The machine should be able unload laser-cut pieces as small as 2in. It can also be extended up to 15 feet, one after the other. It must also be in a position to lift the parts and not damage them. This is often a problem for aluminum or other softer metals.

Tube Cutting Lasers

The fiber laser does not require as much maintenance. The fiber laser doesn't need to be cleaned as often as a CO2 laser cutter machine. The fiber laser does not require any preventive maintenance as long as it has access to clean chiller water and that the filters are regularly replaced.

Leaders in the manufacturing of advanced laser cutting solutions.

Tube Cutting Lasers

How do tube cutters work

Our system solutions have the most flexible selection available for small and large-scale production. They are available in diameters of 10 to 324 mm and lengths of pipe and profiles up to 12.5 m.

Laser cutting machines that cut sheet metal can turn a sheet into a sheet in seconds. A laser tube cutter machine can do the same thing, but it's quite different in how it's done.

Tube

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

The FABRICATOR is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The FABRICATOR has served the industry since 1970.

Tube Cutting Lasers
Fiber Tube Laser

For XXL tube production, the machine was designed to maximize productivity. The machine's solid-state laser can be used to process tubes and profiles in many ways. It is compatible with many types of material and wall thicknesses.

You may have noticed that we haven’t discussed cutting speed yet. It is possible to cut up to 500 inches per minute on a tube, but that’s not always realistic. In laser tube cutting, the real focus should be on how long it takes to load a tube, index it so it’s in the right position for cutting, pierce and cut it, and unload the part. It’s more about part-processing time with laser tube cutting machines, not cutting speed.