Tube Lasers Cutting Systems Michigan

At one time many thought that fiber lasers could be used only for thin materials. The CO2, with its larger wavelength, created enough kerf during the cutting of thick materials that enough space was allowed for material removal; the fiber laser couldn’t produce the same kerf or results with thicker materials. But that has been addressed in recent years with collimating technology that can produce a wider fiber laser-generated beam that creates materials separation and room for material removal in thick materials. And since the beam width is switchable, the machine can use the narrower beam to process thin materials, which allows for faster processing of different-sized materials on the same fiber laser cutting machine.

We can complete your project in one facility with no downtime and extended lead times. We offer full-service center support that can:

A fiber laser's operation can reveal some subtleties that are not obvious. The fiber laser beam has a much higher power density than the CO2 laser beam due to its smaller beam diameter. This not only allows the fiber laser to cut faster but also allows it to pierce quicker. The fiber is able to cut complex shapes and leave sharp edges because of the smaller beam size. Imagine cutting out a company logo from a tube, with letters spaced at 0.035 inches. A fiber can do that while a CO2 laser cannot.

The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.

Parts are held using automatic tabbing in FabCreator, as well as a set on jaws on the idler chuck and drive chuck.

Your in-house laser tube cutting doesn't need to be expensive or complicated anymore. Anyone from students to engineers can cut like never before

North America's foremost magazine for the metal fabricating and metal forming industry, FABRICATOR. The magazine features news, technical articles, as well as case histories, that help fabricators do their jobs more efficiently. Since 1970, FABRICATOR is serving the industry.

Of course, the fiber laser doesn’t need as much attention in terms of maintenance. It doesn’t require mirror cleaning and bellows checks that a CO2 laser cutting machine needs. As long as it gets clean chiller water for cooling and the air filters are routinely replaced, the fiber laser itself is free of preventive maintenance.