Tube Laser Cutter

Why is my laser not cutting

StarCut Tube is a tube-cutting laser machine that offers precision up to +/- 5um.

These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.

Best Tube Laser Cutting Machine —

Fiber lasers have high cutting speeds for thin material. These fiber lasers require minimal maintenance and have low power consumption. These laser cutting technologies have special properties, which allow them to be used in steel, stainless, aluminum, and other non-ferrous materials, like copper, brass, and bronze.

At one time many thought that fiber lasers could be used only for thin materials. The CO2, with its larger wavelength, created enough kerf during the cutting of thick materials that enough space was allowed for material removal; the fiber laser couldn’t produce the same kerf or results with thicker materials. But that has been addressed in recent years with collimating technology that can produce a wider fiber laser-generated beam that creates materials separation and room for material removal in thick materials. And since the beam width is switchable, the machine can use the narrower beam to process thin materials, which allows for faster processing of different-sized materials on the same fiber laser cutting machine.

Tube Laser Cutting Systems Used For Sale

Motion Dynamics is a top manufacturer of neurological subassemblies. These include steerable catheters and "pullwire" assemblies. Motion Dynamics makes use of StarCut Tube machines for precise cutting of key components.

There is no shortage of variety in any job shop. Parts of various sizes are not uncommon when you use one tube. The machine should be able unload laser-cut pieces as small as 2in. It can also be extended up to 15 feet, one after the other. It must also be in a position to lift the parts and not damage them. This is often a problem for aluminum or other softer metals.

Tube Laser Cutting Systems Used For Sale
Tube Laser Cutting Systems Rental

Tube Laser Cutting Systems Rental

A tube's very nature prevents the use of high-powered lasers. Flat sheet laser cutting machines can now be equipped with laser generators that are as powerful as 12kW. Tube laser cutting machines, however, only require 5kW. You must always consider the side you are cutting when you work with a tube. A stronger laser will simply cut through the tube from the opposite end. (Officially, you don't have any need to worry if you are cutting a beam or channel with the tube laser.

Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.

Tube Lasers Cutting Systems Dallas Texas

Remember that checking for bends or bows in the tube using traditional methods can take five to seven seconds before cutting starts. The traditional method of touch sensing is not as accurate as it was. This means you must compromise productivity in order to achieve accuracy. Even though it may seem like a lifetime in the age fiber laser cutting technology, tube work isn't as easy as sheet metal.

Cambus Medical's Coherent StarCut Tube laser-powered tub cutting machine and Select Laser Welders are used to achieve business success.

Pipe Journal
Pipe Journal

Some things aren’t quite as evident until you take a closer look at a fiber laser in operation. Because its beam diameter is often one-third the size of a CO2 beam, a fiber laser has a greater power density than a CO2 laser beam. Not only does this allow the fiber to cut faster, but it also allows it to pierce faster. This smaller beam size also gives the fiber the ability to cut intricate shapes and leave sharp edges. Imagine cutting a company logo out of a tube when the spacing between the logo’s letters is 0.035 inch; a fiber can make that cut, while a CO2 laser can’t.

StarCut Tube SL consists of a complete turnkey machine. It includes an fsl-laser. This makes it ideal for laser cutting complex metal forms such as thrombectomy stent retrievers.

Tube Laser Cutting Systems 1325

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.

Perhaps you have noticed that we haven’t yet discussed cutting speed. Although it is possible to cut 500 inches per minute with a tube, this is not always feasible. Laser tube cutting should not be about how long it takes for a tube to be loaded, indexed so that it is in the right place for cutting, pierce it and then unload it. Laser tube cutting machines are more concerned with part-processing times than cutting speed.

Frequently Asked Questions

Laser cutting pipe is the best way to achieve repeatable and precise cutting in applications where the precision of the cut itself is important.

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.