Traditional tube features are time-consuming. FabLight makes it quick and easy to create exactly the look you desire.
Get medical device manufacturing with precision and maximum uptime with Coherent laser systems for cutting, welding, drilling, texturizing, and marking.
Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.
StarFiber Series includes compact fiber lasers and optional focusing heads to allow for cutting or laser welding. SmartWeld(tm), a technology that allows for fine and large welds, can also be used.
Lasertubes are our 2D- and 3D laser cutting machines for tubes and bars. Available in sizes from 12 mm - 610 mm (.5" - 24") and lengths up to 18m (60")
PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.
Leaders in the manufacturing of advanced laser cutting solutions.
The maintenance of a fiber laser is not as important. It doesn't need mirror cleaning or bellows checks like a CO2 Laser Cutting Machine. It does not need to be cooled with cold water, and air filters can be replaced regularly.
Fiber lasers require little maintenance, are more efficient than traditional CO2 laser cutting machines and can cut reflective materials. They are also faster than CO2 machines for certain metal thicknesses. When it comes to cutting tubes, speed is not necessarily a good thing. You can save time by speeding up the tube processing and producing finished parts.
NIT uses a Coherent Laser Cutting Machine to Vertically Produce Nitinol and Other Metal Components with outstanding precision and edge quality.
Processing tubes and profiles can be used in many different ways. You can use them in many industries, including the automotive industry, furniture design and architecture, as well as commercial vehicle construction. Laser-assisted processing of profiles and tubes offers many options for unique design and a manufacturing range that is almost limitless.
The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.
The CO2 resonator is much larger and requires more energy, as electricity is introduced to a combination of gases to produce the laser beam. Mirrors help the light gain in intensity, preparing it to exit the resonator. After exiting the resonator, the beam must travel through a path comprising several cooled mirrors until it reaches the lens. This travel causes a loss of power and quality in the laser beam.
StarFeed is an automated unloader/loader for StarCut Tube laser cutters. It is available in two sizes: S and L. These combination options allow fully automated dry and wet cutting of tubes up to 20 mm diameter. StarFeed L can store up to 48 tubes, and it even supports the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. This results in a significant increase in productivity.
The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.
A fiber laser cutting machine generates a laser beam using active optical fibers and transmits it to the machine's cutting head via a transport fiber. This extremely hot laser is condensed into a narrow beam and is used to cut through various metal thicknesses.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.