Best Tube Laser Cutting Machine

Through-holes

This is a third of the full 20-foot (240") length of a tube. It makes it easy to make three stock pieces. You can still buy full length tubes without having to waste any material

Lasertubes are 2-D and 3-D laser-cutting systems for tubes, bars, and profile. Available in diameters of 12 mm to610 mm (.5"-24"), and up 18 m (60').

Industry —

All types, all shapes: This machine can cut carbon, stainless and aluminum in any shape or form.

Remember that there is no perfect tube. They can have bows. They can have weld seams that protrude on both the interior and exterior of the tube. This material can be difficult to process consistently and quickly when there are inconsistencies from one product to the next.

Machines

Images of product may not reflect the actual product. Gulf States Saw & Machinery Co., Inc. reserves right to alter product specifications or images at any moment without notice.

Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.

Machines
Processing

Processing

ExactCut 430 can be used to automate the automated processing of thick and thin metals and alloys as well as brittle materials, such as sapphire and PCD.

Fiber lasers cut in thin material with fast speeds. They also require little maintenance and are low in power consumption. This laser cutting technology's special properties allow applications in steel and stainless steel as well aluminum and non-ferrous metallics like copper or brass.

Tooling

Secondary operations are eliminated: A tube Laser can cut a length of piece, add holes and cutout other designs in one operation. It also eliminates the need for additional actions like manual material removal. For more complex fabrications, you can maintain tight tolerances. Parts can easily be manufactured from one continuous raw material. Tube laser aluminum, stainless-steel and carbon can be made.

Many believed fiber lasers could only work with thin materials. Because CO2 has a longer wavelength, it created enough material kerf to permit material removal. Fiber lasers can't produce the same level of kerf and results with thicker materials. This has been corrected by collimating tech, which can produce a wide fiber laser-generated beam that allows for materials separation. It also makes it possible to allow for material removal in thicker materials. You can also switch the beam width so that the machine can process thin materials with the narrower beam. This allows you to process more materials in a shorter time.

Services
Services

For large diameter tubes or profiles, CO2 is the best choice. Tubes up O 14/24" (355 mm/ 610mm) 3D cutting modeCO2 laser

A job shop is only as diverse as the parts it produces. The same applies to those who operate a tube laser. Parts of different sizes can be found in one tube. Laser-cut parts as small as 2 inches must be unloaded by the machine. Each one can be as long as 15 feet. You must also be able unload the parts without damaging them. This can be difficult with soft metals like aluminum.

Reci

Gulf States Saw & Machinery Co., Inc. is a team made up of experienced professionals who can work with clients to create innovative designs that will improve aesthetics, increase functionality, and help them bring new products on the market more quickly.

Imagine having to place a through-hole centered on a tube. It has to be centered to the actual dimension, not just one face of the tube. If the tube is bowed, that’s going to make things more difficult. That’s the life of tube fabricating.

Frequently Asked Questions

Laser cutting pipe is the best way to achieve repeatable and precise cutting in applications where the precision of the cut itself is important.

Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.