Coherent StarCut Tube Hybrid version gives you the most flexibility in cutting different medical devices. This is a complete turnkey laser machine that incorporates two lasers inside a compact housing.
With diameters ranging from 10 to 324 millimeters and pipe and profile lengths up to 12.5 meters, our system solutions offer the largest available selection for the flexible production of small and large series.
Imagine you are required to place a throughhole in a tube. The tube must be centered at the correct dimension. The tube should not be bent. That's tube fabrication.
Motion Dynamics is a leading manufacturer of neurological sub-assemblies, including steerable catheters and “pull-wire” assemblies, making use of our StarCut Tube machines for precision cutting of key components.
Whatever your customers' requests, with Lasertube you can recommend improvements to part design from the extensive library of connectionsfor assembling without screws or welds.
All types, all shapes: This three-dimensional cutting machine will cut carbon, stainless, aluminum and red metals; in round, square, rectangular and irregular shapes.
Reduce time and the number of parts required. Tube frames and metal structures can be assembled faster and with more precision. In one programming step, you can complete your part on one machine and one system.
Laser tube cutting is our specialty. We provide the perfect solutions. You can learn more about laser tube cutting and how they can simplify the process while increasing the production of parts.
The solution with the widest working range in tube laser cutting.Tubes up to Ø 9.45" (240 mm)3D cutting modeCO2 or fiber laser
You have the option of choosing between 2D and 3-D laser cutting technology. This allows you to make precise and customized cuts in a variety of parts, including tubes with rectangular, square, or rectangular shapes. There is also the possibility to cut profiles with diverse cross-sections (for instance, H, U, T, or Ucross sections). 3D technology not only allows straight cutting edges but also permits bevel cuts up to 45 degrees. This versatility means that you don't need to spend a lot of money on milling. Drilling. Punching. Sawing.
To close the time gap when it comes to tube checks, some machinery manufacturers are using cameras for these checks. They reduce the quality check to about half a second and also reduce the number of rotations that are required. This allows the machine to retain productivity as well as accuracy.
Some machinery manufacturers use cameras to check tubes. This is done in an effort to close the time gap. Cameras reduce the time required to check quality and reduce the number rotations. This ensures that the machine can retain its productivity and accuracy.
Many of Gulf States Saw & Machinery Co., Inc.'s tube-laser-cutting systems incorporate intelligent machine functions, such as intelligent monitoring, setup, cutting, and other functions. These automated functions make it easier to operate and increase machine efficiency. These lasers are versatile and can be used in many industries.
You can eliminate secondary operations. A tube laser is able to cut a piece and add holes, or any other cutout design in one step. The ability to control tolerances on more complicated fabrications is gained. To ensure parts fit together in a single way, you can use one continuous piece. We can tube laser-cut aluminum, stainless and carbon.
CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.