Fiber Cutter Machine
FM-Desktop can be used as a mobile engraving machine. It has dimensions of 33.5"x24.5". It has a 4.33" x 4.33", marking area that is perfect for small projects, such as laser engraving knives.
Additional accessories, like a fume extractor lens or a lens, are available to upgrade the machine.
You can laser engrave stainless-steel dog tags with a 30W fiber light source at a angle of 90 degrees. This laser uses 70% of its power and allows you to work at speeds up of 708 ipm.
EZCAD 2.0 can be used on Microsoft Windows XP, Windows 2000, WIN7, WIN8 and WIN10 OS.
Gulf States Saw & Machine Co. provides an EZCAD2.0 software for controlling the Gulf States Saw & Machine Co. FM1212-50S lazer engraver.
Triumph's 30-W desktop fiber laser can be used to create two lenses. The first gives you a 4.3 inch x 4.3 inch engraving area and the second gives you a 7.8 inches x 7.8".
Fiber Lasers by Gulf States Saw & Machine Co. are able to produce consistent and precise metal cutting. This allows you to dramatically improve your production and quality.
Our fiber laser machines use a low-maintenance solid-state laser source to generate a laser beam that is transmitted to the laser cutting heads via fiber optic cable. These fibers move the beam with a beam quality optimized for metal cutting. GSS Machinery provides laser power ranges of 1000W, 1500W, 2000W, 2500W, and 3000W, with a cutting velocity of 35 minutes for fast and precise operations.
The beam quality of 20W- and 30-W lasers is below 1.5 M2, for 50W lasers it is under 1.8 M2.
Gulf States Saw & Machine Co., FM1212-50S can engrave acrylic, hard-plastic, brick, granite, marble, tile, aluminum, gold, silver, stainless steel, brass, titanium, and tungsten.
Some PVC-based acrylics can release toxic fumes if they are heated. It is better that you check the chemical compositions before engraving.
There are other accessories like a fume extractor and lenses, which you can get to upgrade the machine.
MOPA fiber Laser, a particular type of fiber laser, allows for better control over pulse widths as well as frequency parameters. This is used to create color laser engravings onto metals.
Plasma's workings can seem complicated. This is why I will try to explain plasma as clearly and quickly as possible. Plasma cutters heat up gas until it is hot enough to melt metal. When the metal is sufficiently heated to melt it, it is then blown off with gas to make the cut. It's complicated science but it's not what I will be focusing on. (Or you can do your own research if necessary).
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.