Fiber Laser Machinery Light

When the water temperature is lower than the ambient temperature and the ambient humidity is high, condensation water will be generated on the surface of the circulating water pipe and the device to be cooled. When the above situation occurs, it is recommended to increase the water temperature or insulate the water pipe and the cooled device.

Fiber laser machines are more efficient in cutting thin metals. A fiber laser can efficiently cut thin metals to 25mm, or 1 inch. After this point, fiber lasers become less efficient at cutting metal. You'd need to use a lot of power, which would also cost more, in order to cut ticker metallics over 25mm or one inch.

MCWlaserPRO is sold as a single product. You can however customize the software during your purchase.

GSS Machinery also provides auto-loading and unloading systems that can be integrated with fiber laser machines for maximum automation, increasing speed and efficiency for your processing requirements.

Mirror galvanometers are a group of mirrors located in the laser head. They move very quickly to alter the path of laser engravers. A 10 degree rotation at the head can produce 1 3/4 inches of movement at 10 inches. It can also be used for tracing the laser paths, before engraving or cutting.

�It's mind-blowing. It just works. It�s almost like you have to pinch yourself because it�s just that fast,� he said. �It�s cutting four to 10 times faster than a CO2, and it�s using less electricity.�

FM-Desktop has the ability to engrave acrylic, plastics (brick, PVC), granite, marble and tile.

Fiber lasers use much less energy than CO2 lasers. They operate at shorter wavelengths (780 nm to 2200 nm) and have a much higher absorption.