Machinery
Fiber lasers are changing the industry in laser metal cutting with their low maintenance and high cutting efficiency.
You can begin your first job once you have access to the machine via RetinaEngrave 3.0. This can all be done in 30 minutes.
They also have a dedicated website for customers. There are small groups that are active on Facebook.
With a 30W fiber laser, you can engrave dog tags on stainless steel at a 90� angle with a speed of ~708 ipm by utilizing 70% of the laser power.
Fiber lasers, on the other side, can cut through reflective material if they have enough power. They can easily cut through any type of metal with sufficient power. They are limited only by the thickness they can cut.
Fiber lasers are limited in their focal point. This makes it difficult to use them to cut thicker materials. A CO2 laser is the best choice in such situations.
Fiber lasers have a very small focal point which makes it impossible to cut through thick materials with them. In these cases, a CO2 Laser is the best option.
FSL Muse Pandora from Full Spectrum Laser (FSL) has 20W, 30W, and 50W laser options available to choose from.
Because of the various wavelengths they can generate, fiber laser machines are widely used in various metal industries, and they are also applicable in other fields such as telecommunications and medicine.
Fiber lasers are solid lasers. But, they are also different from diode Lasers. There is a big difference in their capabilities.
�We went to fewer machines with lower kilowatts, yet we now have higher throughput because the machines operate more intelligently and the automation prevents bottlenecks. The combination has allowed us to get work through faster at a more competitive price and actually gain more work.�
It is important to remember that a fiber laser has limitations in terms of both the size of your work-bed and the material you can cut.
Some acrylic that is made of PVC emits toxic fumes when it is heated. You should always verify the chemical composition of the materials that you are going to engrave.
The laser beam generated by the amplifier is then fed to cutting heads using a flexible optic fiber.
In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
What Materials Can Be Cut With A Fiber Laser? A fiber laser cutting machine can cut sheet metal such as carbon steel, stainless steel, copper, brass, aluminum, and titanium. Fiber lasers outperform CO2 lasers in cutting reflective materials.