Bodor
Some PVC-based acrylics can release toxic fumes if they are heated. It is better that you check the chemical compositions before engraving.
There are other accessories like a fume extractor and lenses, which you can get to upgrade the machine.
MOPA fiber Laser, a particular type of fiber laser, allows for better control over pulse widths as well as frequency parameters. This is used to create color laser engravings onto metals.
Plasma's workings can seem complicated. This is why I will try to explain plasma as clearly and quickly as possible. Plasma cutters heat up gas until it is hot enough to melt metal. When the metal is sufficiently heated to melt it, it is then blown off with gas to make the cut. It's complicated science but it's not what I will be focusing on. (Or you can do your own research if necessary).
You can laser engrave stainless-steel dog tags with a 30W fiber light source at a angle of 90 degrees. This laser uses 70% of its power and allows you to work at speeds up of 708 ipm.
EZCAD 2.0 can be used on Microsoft Windows XP, Windows 2000, WIN7, WIN8 and WIN10 OS.
Fiber Lasers by Gulf States Saw & Machine Co. are able to produce consistent and precise metal cutting. This allows you to dramatically improve your production and quality.
Our fiber laser machines use a low-maintenance solid-state laser source to generate a laser beam that is transmitted to the laser cutting heads via fiber optic cable. These fibers move the beam with a beam quality optimized for metal cutting. GSS Machinery provides laser power ranges of 1000W, 1500W, 2000W, 2500W, and 3000W, with a cutting velocity of 35 minutes for fast and precise operations.
Gulf States Saw & Machine Co. provides an EZCAD2.0 software for controlling the Gulf States Saw & Machine Co. FM1212-50S lazer engraver.
Triumph's 30-W desktop fiber laser can be used to create two lenses. The first gives you a 4.3 inch x 4.3 inch engraving area and the second gives you a 7.8 inches x 7.8".
When using fiber laser machines to cut projects, it is necessary to learn the use and maintenance skills, in order to better exert the effectiveness of the equipment and maximize the efficiency of the equipment. 1. Check the steel belt frequently to ensure the tension. Otherwise, if something goes wrong during operation, people may be injured and serious death may result. The steel belt looks like a small thing, but the problem is still a bit serious. 2. Check the straightness of the track and the verticality of the machine every six months, and find that it is abnormal and timely maintenance and debugging. Without this, the effect of cutting may not be very good, the error will increase, affecting the cutting quality. This is the top priority and must be done. 3. Use a vacuum cleaner to suck off the dust and dirt in the machine once a week. All electrical cabinets should be closed and dustproof. 4. The guide rails should be cleaned frequently to remove dust and other debris, to ensure that the equipment racks are cleaned frequently, and lubricating oil is added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, the machine can move better during cutting, cut more accurately, and the quality of the cut product will improve. 5. If any damage is found in the process of using the machine, it must be replaced in time, which is not only a type of protection for the machine itself, but also ensures that the machine always maintains an ideal cutting effect.
Fiber lasers are widely used for engraving purposes. Their wavelength ranges lie between 780nm and 2200nm.
FM-Desktop can be used as a mobile engraving machine. It has dimensions of 33.5"x24.5". It has a 4.33" x 4.33", marking area that is perfect for small projects, such as laser engraving knives.
Additional accessories, like a fume extractor lens or a lens, are available to upgrade the machine.
Fiber lasers typically cost between $20,000 and $45,000.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.