Fiber Laser Machine Manufacturers In India

ST-FC1325LC flatbed fiber laser metal cutting machine combined with CO2 laser cutting system is a type of professional 4x8 hybrid laser cutter to cut metals (steel, aluminum, copper, brass, titanium, alloy, iron) and nonmetals (wood, plywood, MDF, plastic, acrylic, leather, fabric).

There are several laser power options available: 1000W to 1500W, 2000W to 2500W, 2500W to 3000W. These fiber laser machines are fast and precise, with a cutting speed of 35 meters per minute. Laguna Tools also offers machines that have an enclosed area for reducing light pollution.

It is free to use, and it can be installed on Microsoft Windows XP (or Windows 2000), WIN 7, WIN8, or WIN 10 OS.

The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.

Gulf States Saw & Machine Co., fiber laser systems can etch and mark a wide variety of plastics and metals. Below is only a sample of some of the materials that have been marked with one of our fiber laser systems.

Fiber laser machines, on the other hand, provide a zero contact procedure in which the laser beam does not physically interact with the material it is aimed at. This procedure ensures that only the heated area is directly affected, with no risk in the material's vicinity. It is also a distinct procedure, and fiber laser machines produce high-quality, accurate, and precise cuts that are visible to machines and operators.

In an optical fiber laser, the light is bent by refraction. An optical fiber cable passes the light through an impurity-free transparent silica glass core. The core is covered with cladding, another layer of silica doped with added materials for lowering its refractive index. Because of their refractive index difference, the light will get refracted at the core-clad interface.

In laser engravers, a mirror galvanometer is a series of mirrors in the laser head that move extremely fast to manipulate the path of the laser. A small rotation of 10 degrees at the head is enough to produce 1 3/4" inch of movement at 10 inches. It is also used to trace out the laser paths before engraving or cutting.