What is a beam drill line
Voortman’s 24 hour tech support center can resolve 90% of your support issues. An extensive network of 50+ Voortman personnel is stationed across North and South America.
Voortman’s Roller Feed Measuring system surpasses industry standards in roller measurement technology. The key to accurate measurements is not allowing for any production hesitations. Even when there are material variations, accuracy must be maintained.
We have used more than 1,000 CNC Drill Line and Angle Lines in the world. We have found that even an experienced operator who has never programmed before can use the machine efficiently in less than half an day.
Voortman inside technicians are often able to resolve any problem remotely. Voortman technicians can access your machine via an internet connection. Voortman equipment has a powerful Windows(r-based Siemens control which allows this capability and offers superior diagnostics through Windows(r).
A 4-axis layout attachment eliminates human error from manual layout methods. The part information can still be used after blasting, painting, or galvanizing.
A 4-axis layout marking attachment eliminates human error in manual layout methods. Part information is retained even after painting, blasting and galvanizing.
The Franklin HD145(3) spindle CNC drill is available in 44-inch width. The HD-145 can carry beams upto 750 lbs/foot. Hi-performance spindles provide drilling capabilities of up to 2,000 rpm. This rigid design delivers extremely high feed rates of up 300 surface feet per hour. You can have the Franklin HD145 equipped with various material handling packages, from 300 lbs per ft to 750lbs per ft.
Programming the CNC Drill Line for new operators is simple and intuitive, even for those who don't have any computer or CNC experience.
Voortman's CNC Beam Drill Lines may be part of a Drill Saw Line combined or larger, fully automated integrated production lines. Also known as Multi System Integration. It's easy to learn more.
Voortman's Roller Feed Measurement System exceeds industry standards for roller measurement technology. It is essential to ensure that accurate measurements are taken without any delay in production. Even if there are slight variations in the material, accuracy is maintained.
Voortman's CNC Beam Drill Lines are often included in a combined Drill Saw Line or even in larger fully automated integrated production lines, also referred to as Multi System Integration. Find out more about it below!
Auto Standoff is currently defined as surface-stand-off. This should not be confused for vector standoff with 5-axis. The current auto stand off is based on a moving surface. It will adjust vertically based the angle at the "A" Axis. You can perform the vector change even if the machine is not running with the help of buttons on screen.
CNC Drill Lines are among the most economical CNC beam drill lines available. They allow fabricators to win more work and earn more margin.
Yes. There are many CNC Drill Lines outside. Weather protection must be provided for the control panel as well as the mobile platform. For photos of many of our outdoor installations, please contact us.
An I beam is stronger than a cylindrical tube for beams with equal weight and depth. This is because the I beam contains more material close to the extremities.
The primary structural framing component that will support the load is the beams. To resist and redistribute load, beams must bend. Girders on the other side are rigid because they support the beams and provide the main horizontal support.
C or Channel Beams. Channel beams are typically used to support lighter loads. They are a popular choice for residential construction and not for heavy construction.
The width/depth ratio (W/D), is the ratio of the bankfull bankfull width to the average depth of the bankfull canal. This ratio is crucial for understanding how energy is distributed within a channel and how sediment can be moved by various discharges.
Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.