Cnc Beam Drill Line Extension

If a CNC drill machine doesn't allow a fabricator the ability to compete at the highest level in steel fabrication, what good is it? The Advantage-2 is able to process technical programming with intelligence and speed. Each drill axis comes equipped with three five station tool changers. These can be used to drill, mill and countersink as well as tap and scribe. Signoscript underside or Signomat part stamping units can be added to this drill line. You can keep your part information even after you have finished painting, blasting, or galvanizing. Minimizing shop errors? Check. The Advantage-2's carbide tooling allows for more aggressive drilling and more holes per hour than any other drill line. The high torque drilling tools have a more aggressive cut, removing more chips each rotation. This drill line is capable of cutting through beams, channels, angles, tubes, and even flat bars. Advantage-2 can handle any profile with a processing window of 44inches wide by 18inches high.

Auto Stand-Off is currently defined as surface stand-off. It should not be confused with vector standoff in 5-axis mode. Auto stand-off currently works on a changing surface. It adjusts vertically based upon the angle of the Axis. This means that five (5) axes are taken into consideration during calculations. However, this is not the same thing as tool vector standoff. You can change the vector standoff while the machine runs manually by pressing buttons on the screen.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

Gulf States Saw & Machine Co. has a Drill Line or Beam Drill Line that will suit every fabricator. We also have Beam drills for those who have limited work space.

Voortman’s CNC Beam Drill Lines often come in combination with a Drill Saw Line or larger fully automated integrated production line, commonly referred to as Multi System Integration. You can find out more information about it here!

Voortman is the only manufacturer of the CNC Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.

GSS Machinery staff and personnel have been a tremendous support to me. Without them, I believe we wouldn't be in the position we find ourselves in in the steel fabricating markets.

Voortman creates machines just for GSS Machinery, to meet our high standards. GSS Machinery targets smaller to medium fabricators, while Voortman targets large fabricators. Voortman has been manufacturing machines for GSS Machinery over 10 years. GSS Machinery, Voortman’s largest customer worldwide, is Voortman.