Cnc Drill Line Jefferson

“.. Although this machine is marketed for the Structural fabricators, I knew immediately it would work well for drilling truck frames. The accuracy & repeatability have ensured the assembly without error. The Avenger drills a set of channels for one truck in less than one 2 hours; when we did this manually, it would take 16 hours. This machine has increased our productivity & profitability hands down!..”

AC Unit on Electrical Cabinet. - The unit can be mounted on the cabinet’s High power (480v), side. It is in close proximity to the location that the drives are located. This option maintains the cabinet temperature and speeds up heat dissipation. All axes' servo drives are the major contributors to heat within the electrical cabinets.

Voortman builds machines specifically for GSS Machinery to meet our demanding specifications. GSS Machinery specifically targets the small to medium fabricator whereas Voortman targets the larger fabricators. Voortman has been building machines for GSS Machinery for more than 10 years, and GSS Machinery is Voortman largest customer worldwide.

The CNC Drill Line is programmed either manually on the machine or by using the Peddimat program. This software is included in the AVENGER. It can be installed on any number of computers in your office that you like. It is the exact same software as the machine, and it is also used on all Voortman CNC fabrication machinery.

"..We have installed a new beam-drill line in an effort to satisfy customer needs and increase production. The result has been a reduction in labor costs and faster turnaround times which have consistently helped us land quality job opportunities.

The Advantage-2 carbide drill line utilizes automatic tool changing technology and completely electronic ball screw feed spindle motion. This combined with Voortman' renowned build quality and mechanical design provide the ultimate combination of agility and strength.

It doesn't matter if a CNC drill isn't able to position a steel fabricator to be competitive in the steel fabrication market. The Advantage-2's ability to process technical files with intelligence, speed and precision is what makes it so special. Each drilling axis can operate with three five-station tools changers. Signoscript's underside scriber and Signomat's part stamping unit can be attached to this drill axis. Part information is preserved even after galvanizing, blasting, and painting. Minimizing shop errors? Check. Advantage-2 uses carbide tooling to drill more holes and is more aggressive than any other drill. High torque drilling instruments have a thicker and more aggressive cut which removes more chips from each rotation. This drill can remove beams, channel and angle tubes as well as flat bars. Advantage-2's processing window is 44 inches wide by 18 inches high.

The CNC Drill Line can lay out and drill all of your holes in any type of steel profile in fractions of the time that it takes to do manually with a mag drill. It also marks all your welded attachments, eliminating the need to use a tape measure.