Drill Line Size

Drill Cnc

CNC Drill Line is an efficient beam processing solution that requires very little floor space. It can be used for up to 70ftx9ft. CNC Drill Line installations can also be found outside, which gives the fabricator more space.

Voortman’s Roller Feed Measuring system surpasses industry standards in roller measurement technology. The key to accurate measurements is not allowing for any production hesitations. Even when there are material variations, accuracy must be maintained.

Cnc Drill Line Artist

CNC Drill Line offers the most affordable CNC beam drilling line available today, which allows the fabricators to win more jobs and make more margin.

Peddimat is intuitive and simple to use. It takes less than an hours to learn even if you've never used a computer before.

Cnc Drill Line Cut-off Program

Cnc Drill Line Cut-off Program

"..We have drilled approximately 25.000 holes since we purchased our CNC Drill Line four months ago. It used to take us 5 minutes to drill each hole. It now takes us approximately. It takes us 30 seconds per hole... that's a savings of 1875 hours over 4 months. This is equivalent to $84,375 in our shop. This machine will pay off in less than a year, as you can see. It not only speeds up production but also frees up space for more jobs.

Importing files directly into your steel detailing software is a better option. It eliminates unnecessary steps and can also prevent any incorrect data capture. This is a distinction that can be distinguished into two camps:

Drill Cnc

Cnc Drill Line Trucking

Automatic Edge Finder – The edge finder can be used manually (Jogging method & Screen Buttons), programmatically, or fully automated (dedicated programme). This option adjusts offsets and program rotation to match orientation and location on the cutting board.

The CNC Drill Line has two options: it can be programmed in-house or at work using the Peddimat programming software. This software comes as part of the AVENGER. The unlimited license allows you to install it on as many machines in your workplace as you'd like. It's the same software found on your machine.

Cnc Drill Line Trucking

Cnc Drill Line X Cost

Peddimat has a simple, intuitive interface that is easy to understand.

Voortman's dedication to customer service and support is unmatched and the gold standard of the industry. Voortman has a worldwide team of customer service representatives who are available 24 hours a day at the Voortman customer support center. Voortman support is just a click or call away. With state-of the-art remote diagnostic software and readily available local field support, as well as an industry-leading warranty, it's easy to get help.

Ocean Avenger Drill

To service our global clientele, Voortman proudly provides our partners with 24 hour technical support. Voortman’ inside service staff have years of experience in the field, assembly, or factory checkout which provides them with hands-on experience with most machines. At Voortman their service staff is not only available when you need them, but they maintain superior knowledge to solve questions as they arise.

Voortman AccuMeasure Roller Feed measurement systems offer saw measurement options. AccuMeasure offers complete handling flexibility while providing a simple CNC solution. The ability to separate a drill from a saw means that neither machine has to wait for the other, maximising production.

Cnc Drill Line Trucking

Check our other pages :

H Drill

Advantage-2 carbide drills are equipped with electronic ball screw feed spindle motors and an automatic tool changer technology. Combining these features with Voortman’s well-known build quality as well as mechanical design, the result is a combination that combines agility and strength.

Over the past decade the UNIST MQL lubricant system has become the dominant coolant system in the USA, and has become standard equipment on the Aveger FORTY, Avenger PLUS and Clipper. This minimum quantity lubricant is an oil based coolant that promotes longer tool life. It is non toxic.

Frequently Asked Questions

It is considered a girder if it is the main structural support made up of smaller beams. The Code does not specify the dimensions that will distinguish a beam and girder.

The hole size should not exceed 38mm (1.25 in.). The beam depth should not exceed one-tenth of the hole diameter, whichever is less, with the exception being 25mm (1 in.).

THE STANDARD SIZE FOR THE BEAMS It is 9" x 12" or 225mm x 300mm in a residential building, according to (IS codes).

T Beam's disadvantages: Because the beam slab is monolithic (rigid), its resistance to lateral shear forces becomes very weak. (cracks develops quickly). This is why T beams are used for high-rise buildings in earthquake-prone areas.

To reduce the chance of the beam escaping from the concrete column, the development length is required. It acts as a support member for the reinforced beam within the concrete column.